eufy X10 Pro Omni Robot Vacuum and Mop: features, specs and who it suits

The eufy X10 Pro Omni (model T2351) is a robot vacuum and mop paired with a station that looks after the machine between cleans. It empties its own dust bin, washes and dries its mop pads, and refills its water. The idea is that day-to-day floor care needs very little hands-on work.

What the station does

According to eufy, the station washes the mop pads with clean water and then dries them with 45°C (113°F) heated air. Drying pads between runs is generally a sensible step, since damp pads left in a dock can develop a musty smell. The robot's dust bin empties into a 2.5 L dust bag in the station, which eufy says only needs replacing every two months, depending on use.

A 3 L clean water tank feeds the mopping. eufy says that is enough to mop a 1,500 to 2,000 sq ft (about 150 sq m) home two to three times.

Suction and what 8,000 Pa means

Pascals (Pa) measure suction pressure. Higher figures generally mean the vacuum can pull debris from deeper in carpet fibres, although brush design and airflow matter too. eufy rates the X10 Pro Omni at 8,000 Pa and says it removes hidden debris, including pet hair, from carpets in a single pass.

How the mopping works

The dual mop pads spin at 180 rotations per minute with 1 kg of downward pressure, which eufy calls MopMaster 2.0. Spinning pads with pressure are meant to lift dried-on marks better than a pad that is simply dragged along. When the robot detects carpet, the pads lift by 12 mm automatically, so the carpet stays dry.

Navigation and obstacle avoidance

iPath Laser Navigation maps the home and plans efficient cleaning routes. On top of that, eufy's AI.See system identifies more than 100 object types, such as wires, shoes and toys, including at night, so the robot can steer around them. With AI.Map 2.0 in the app, you can set No-Go Zones and virtual boundaries and customise cleaning scenarios.

Hair and the roller brush

An auto-detangling roller brush spins in reverse and a Pro-Detangle Comb flips down to loosen hair wrapped around the roller. Hair tangles are a common upkeep chore on robot vacuums, so automating it reduces how often the brush needs checking by hand.

Size and placement

The station measures 14.4 x 18.9 x 18.1 inches (about 37 x 48 x 46 cm) and the listing gives a weight of 26.4 lb (about 12 kg). It needs a wall-adjacent spot with space around it and a power outlet, as the manual describes.

What to check before you buy

• Floor types: confirm how much of your home is carpet, tile, or hardwood, and check the manual on mopping each type.
• Rugs and thresholds: check the climbing height for door thresholds and the lifting behaviour on thick rugs.
• Station space: make sure you have room for the station and clearance in front of it.
• Consumables: note the dust bag, mop pads and filters you will replace over time.
• App and Wi-Fi: confirm your home network works with the app for maps and scheduling.
• Cables and small items: even with obstacle avoidance, clear the floor of loose items as the manual advises.

The short version

• A robot vacuum and mop with an all-in-one station, model T2351.
• 8,000 Pa suction, dual spinning mop pads with 1 kg of pressure, and 12 mm automatic pad lift on carpet.
• Station washes and dries pads (45°C air), self-empties into a 2.5 L bag and holds a 3 L clean water tank.
• iPath laser navigation, AI.See object recognition and customisable AI.Map 2.0.
• Auto-detangling roller brush.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.