VEVOR HXCZDJ-06 Hitch-Mounted Truck Crane: 1,000 lb capacity explained

The VEVOR HXCZDJ-06 is a hydraulic crane that mounts in a pickup truck's receiver hitch. It lets one person lift and swing heavy items, such as engines, lumber or workshop equipment, onto or off a truck, without needing a forklift or several helpers. This page explains how its features work and what to confirm first.

How a hitch-mounted crane works

The crane's base slides into the vehicle's trailer receiver, so the truck's frame carries the load. A hydraulic jack raises the boom, and the boom can be swung around to position the load over the bed. Because the weight sits behind the rear axle, the load limit and the boom setting both matter. Capacity typically drops as the boom is extended further from the base.

Three boom capacities

VEVOR lists three boom settings with capacities of 500, 750 and 1,000 lb. The idea is that the shortest, most upright arrangement carries the most, and longer reach carries less. Always match the setting to the weight of the load, and stay within the limit marked on the crane and in the manual.

360° swivel and lift range

The support frame rotates a full 360 degrees, so you can lift a load from one side and set it down on another. VEVOR gives a lift range from about 51 to 90 inches (roughly 130 to 230 cm), which sets how high and low the hook can reach. Check that this range covers your bed height and the items you plan to move.

The 8-ton hydraulic jack

The crane uses a hydraulic jack that VEVOR describes as an 8T cylinder. The brand says this improves lifting speed and reduces the load on the frame. The 8-ton figure refers to the jack, not the crane's lifting limit, which is 1,000 lb at the best setting.

Construction

The listing describes painted alloy steel construction, intended to be strong and corrosion resistant. It measures 74.8 x 42.9 x 46.5 inches (about 190 x 109 x 118 cm) and weighs 82.9 lb (about 37.6 kg), so moving it into the hitch is a two-hand job, and you may want help.

Where it is used

VEVOR names construction, forestry and factory use, as well as lifting engines, lumber and equipment around a workshop or property.

Who it suits

It suits truck owners, tradespeople, farm and workshop users and small businesses that regularly need to load heavy items alone. If you lift loads only rarely, check whether renting equipment would meet your needs.

What to check before you buy

• Hitch size and limits: confirm your receiver size and its tongue weight and load limits, as set by the vehicle maker.
• Vehicle limits: check the truck's payload and rear-axle limits with the load in place.
• Load weight: include any rigging, slings or containers in the weight.
• Ground and truck stability: use on firm, level ground, as the manual describes.
• Storage: at about 83 lb, decide where it lives when not in use.
• Inspection and upkeep: check hydraulic fluid, seals and fasteners as the manual advises.
• Operation: follow the manual, keep people clear of the load and never exceed the stated capacity.

The short version

• A receiver hitch crane that lifts up to 1,000 lb at its strongest setting.
• Three boom capacities: 500, 750 and 1,000 lb.
• 360° rotation and a lift range of about 51 to 90 inches.
• 8T hydraulic jack and painted alloy steel construction.
• Weighs 82.9 lb; check hitch, vehicle and load limits before use.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.