VEVOR 750 lb Rotating Engine Stand: features, specs and who it suits

The VEVOR 750 lb Engine Stand holds an engine block at a convenient height and lets you rotate it, so you can reach every side during a rebuild or repair. It has four adjustable mounting arms, a 360° rotating head and four casters for moving it around the garage.

What the 750 lb capacity means

An engine stand carries an engine that has been lifted off the vehicle, usually with a hoist. VEVOR rates this one at 750 lb (3/8 ton, about 340 kg). Engines vary a lot in weight, and a bare block is lighter than one with heads, intake and accessories fitted, so it helps to know the weight of your own engine, with whatever is still attached to it, and keep a margin below the limit.

The H-shaped base

The base is H-shaped, which VEVOR says is more stable than the traditional T-shaped base. A wider footprint makes tipping less likely when a heavy engine is rotated off-centre. VEVOR describes the body as cast iron, with alloy steel used for the stand, and an electrostatic spray finish to protect against rust.

Mounting arms and rotation

Four adjustable arms attach to the engine block. Each has 1.1-inch hex head bolts, which VEVOR says hold the block tightly. The head rotates through 360°, and a 20-inch extended handle with six location holes is included to turn the engine and lock it at the angle you want. VEVOR says it suits a range of engine blocks, so check bolt pattern and arm reach against your engine.

Casters and movement

The stand has two fixed wheels and two 360° swivel wheels, one of which has a brake. The casters are made of QT450 cast iron, which VEVOR says resists pressure and wear. Fixed and swivel wheels together make it easier to steer, and the brake keeps it from rolling when you work. Smooth, level concrete is best; casters struggle on cracked or sloping floors.

Size and weight

Dimensions are about 33.3 x 27.6 x 33.3 inches (85 x 70 x 85 cm), and the stand itself weighs 41.4 lb (18.8 kg). That footprint is worth measuring against your workspace, especially if you want to rotate a large engine fully.

Who it suits

The stand is meant for home mechanics and professionals doing engine rebuilds, gasket and seal work, or any job where a block needs to be reached from different sides.

What to check before you buy

• Engine weight: compare your engine's weight, including attached parts, with the 750 lb capacity.
• Bolt pattern: confirm the arms can reach and fit the mounting points on your block.
• Floor: use on a flat, solid floor, and engage the brake before working.
• Assembly: check the manual for how to tighten the bolts and the base.
• Lifting: a separate engine hoist is needed to put the engine on the stand; follow its limits and manual.
• Safety: follow the instructions, keep the load centred and never stand under a suspended engine.

The short version

• A cast iron rotating engine stand rated by VEVOR at 750 lb (3/8 ton).
• H-shaped base, four adjustable arms with 1.1-inch hex bolts, and a 360° head.
• Four casters, one with a brake, and a 20-inch handle with six location holes.
• About 41.4 lb; measure your garage space and match the arms to your block.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.