VEVOR 3-Ton Electric Car Jack with Impact Wrench Kit: specs explained

This VEVOR kit pairs a 12V electric scissor jack, rated for 3 tons, with an electric impact wrench. Between them they cover the two jobs of a roadside tyre change: lifting the car and loosening the wheel nuts. The listing gives the model as ZS3SJ and says it is aimed at roadside emergencies and home garage repairs.

The jack

A scissor jack raises a load as a motor draws two arms of a diamond-shaped frame together, and a remote control operates it. VEVOR rates it at 3.0 tons (6,600 lb) and says it takes about two minutes to reach its maximum height of 16.5 inches. Capacity is the weight the jack is designed to handle, and a jack lifts only part of a vehicle, so check your owner's manual for jacking points.

Two saddles change the range:

• Short lifting head: 5.1 to 14.6 inches (130 to 370 mm).
• Long lifting head: 6.7 to 16.5 inches (170 to 420 mm).

VEVOR says the jack stops automatically at its maximum height, and the listing says it has a heavy-duty steel structure, a built-in LED light and a waterproof build. It must be used on flat ground and placed parallel to the car.

The impact wrench

An impact wrench delivers short rotational blows in addition to steady turning force, which is why it can free tight nuts quickly. VEVOR lists a maximum torque of 450 N·m. Two sockets cover four nut sizes: 17 and 19 mm on one, 21 and 23 mm on the other, which VEVOR says matches a range of vehicles. According to the listing, you select the right socket and hold the power button until the nut comes off.

Torque figures on impact tools describe loosening force. Wheel nuts should be tightened to the torque in your vehicle manual, normally with a torque wrench, not an impact tool alone.

Power

The jack runs from a 12V cigarette lighter socket or from a car battery, with an 11.5 ft (3.5 m) power cord to reach either the front or the rear wheel. Three spare fuses are included, and VEVOR says they are TUV and UL certified. Check the manual for how the wrench is powered and for any limits on running both tools at once.

What is in the case

The listing names the electric jack, two saddles, three spare fuses, gloves, a battery clip, a cigarette lighter power cable and a tough case. A luminous red triangle on the case can serve as a warning sign. This version measures about 18.9 x 13.2 x 5.3 inches and weighs 18 lb (8.2 kg).

Safety in use

A jack lifts; it does not hold. As standard advice, never go under a vehicle supported only by a jack, use rated jack stands, apply the handbrake, and follow the manual and local rules.

Who it suits

It suits drivers who want an all-in-one, powered tyre-change kit for the boot (trunk), and home mechanics who rotate wheels or change seasonal tyres. People with unusual wheel fasteners, such as locking nuts, should check what else they need.

What to check before you buy

• Nut size: confirm your lug nuts fit one of the four listed sizes.
• Locking nuts: these need their own key.
• Vehicle weight and clearance: compare them with the jack's capacity and minimum height.
• Power: make sure your vehicle has a working 12V socket or accessible battery.
• Surface: use only on flat, firm ground.
• Tightening: plan to use a torque wrench for final tightening.

The short version

• A 12V electric scissor jack kit rated for 3 tons, bundled with an electric impact wrench.
• Wrench torque is listed at 450 N·m, with sockets for 17, 19, 21 and 23 mm nuts.
• Two saddles with lifting ranges of 5.1 to 14.6 inches and 6.7 to 16.5 inches.
• Remote control, auto-stop, LED light, three spare fuses, carrying case.
• About 18.9 x 13.2 x 5.3 inches and 18 lb.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.