WORKPRO 20V Cordless Mini Circular Saw: features, specs and who it suits

The WORKPRO 20V Cordless Mini Circular Saw is a compact saw with a 4-1/2 inch blade, sold as a kit with a battery, charger, three blades and a storage bag. Mini saws like this suit small cutting jobs around the house and workshop, where a full-size circular saw would feel heavy and awkward. Here is what the listed specifications mean.

Size, weight and the 4500 RPM motor

WORKPRO lists a no-load speed of 4500 RPM and a saw weight of 4.36 lb (about 2 kg) without the kit. "No-load" means the blade speed with nothing being cut; it drops under load. The brand says the saw is meant for wood, tile, plastics, PVC and soft metals, depending on the blade fitted. A smaller blade means a smaller cutting capacity, but also a lighter tool that is easier to use with one hand, which the brand highlights with its rubberized ergonomic handle.

Cutting depth and bevel angle

The maximum depth of cut is 1-11/16 inches (about 43 mm) at 90° and 1-1/8 inches (about 29 mm) at 45°. The bevel angle adjusts freely from 0° to 45°. In practice, that covers plywood, typical 2x lumber laid flat (which is 1-1/2 inches thick, so it fits the 90° depth), flooring, laminate and trim. Deeper timber, such as a 4x4 post, would need several passes or a bigger saw. The bevel is useful for mitred edges and angled joints.

Guides for straighter cuts

The saw has a laser guide and comes with a parallel guide. A laser line shows where the blade will travel, while a parallel (rip) guide runs along the edge of the board to keep repeated cuts at a set distance. Neither replaces clamping the work down and marking it clearly, but both help with accuracy.

Three blades in the box

The kit includes a 24-tooth alloy blade for wood, a 60-tooth blade for wood and plastic, and a diamond blade for tile. In general, fewer teeth cut faster and rougher, while more teeth give a smoother finish. Diamond blades grind rather than slice, so they are used for tile and similar hard material, usually with dust control and eye and ear protection.

Battery and charger

The 20V lithium-ion battery is 4.0Ah (4000mAh), and the 2.4A fast charger can charge one battery in as little as two hours, according to WORKPRO. A battery release button is built in. Amp-hours indicate capacity: a larger number generally means longer run time between charges. Check whether the battery is compatible with other tools you own before assuming it is interchangeable.

Safety and dust

A switch lock is intended to stop the saw starting accidentally. A dust extraction tube can connect to a vacuum cleaner through an adapter, which helps keep the work area clean. As with any saw, follow the manual, wear eye and hearing protection, and keep both hands clear of the blade path.

Who it suits

It fits DIY users, hobbyists and people who need a light second saw for small trim, panel or tile jobs, in the workshop or outdoors. It is not a replacement for a full-size saw if you regularly cut thick framing lumber.

What to check before you buy

• Depth of cut: compare 1-11/16 inches at 90° against the thickest material you cut.
• Battery platform: confirm whether you need the battery to work with other tools.
• Blade type: check that the blades supplied match your materials; replacements need the right size and arbor.
• Dust control: if you plan to cut tile, plan for dust collection and protective gear.
• What's in the box: the listing includes a hex key, parallel guide, dust tube, bag and manual.

The short version

• A 20V cordless mini circular saw with a 4-1/2 inch blade and 4500 RPM no-load speed.
• Cuts to 1-11/16 inches at 90° and 1-1/8 inches at 45°, with 0° to 45° bevel.
• Laser guide, parallel guide, switch lock and a vacuum-ready dust tube.
• Kit includes a 4.0Ah battery, fast charger, three blades and a storage bag.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.