VEVOR TC180II 7-inch Wet Tile Saw: motor, blade and cutting capacity

The VEVOR TC180II is a compact 7-inch wet tile saw for cutting tile, stone and ceramics. It has a 3500 RPM induction motor, a water reservoir to keep the blade wet, and a table that tilts to cut mitres. VEVOR positions it for DIY users working on bathroom, kitchen and floor projects.

What a wet saw does

A wet tile saw feeds water to the blade while it cuts. The water cools the blade and helps keep dust down, which usually gives a cleaner edge on hard materials such as porcelain and stone. Here, the water sits in a removable polypropylene (PP) reservoir. Wear eye protection and hearing protection, and follow the manual's guidance on dust protection, since cutting stone and tile produces fine particles.

Induction motor

The saw has an induction motor running at 3500 RPM. Unlike a brushed motor, an induction motor has no carbon brushes, which means fewer parts that wear out and typically smoother, quieter running. VEVOR says it reduces vibration and noise and gives strong starting torque. Brushless-style motors also tend to need less maintenance, although you should still follow the care instructions.

Blade and cutting depth

The blade is a 7-inch (180 mm) blade made of 65Mn steel, a spring steel often used for tough, resilient parts. VEVOR lists a maximum cutting depth of 1.25 inches (31 mm), which covers most wall and floor tiles and many thinner stone pieces. A blade that is designed for the material, such as a diamond blade for porcelain, makes a difference, so check what blade is fitted and what it is rated to cut.

Mitre cuts

The table adjusts from 0 to 45 degrees. A 45-degree cut lets two tiles meet at a clean corner without a visible edge, which is used for outside corners, trim and decorative edges. Check that the angle lock holds securely before each cut.

Work surface and safety switch

The work surface is galvanized, and VEVOR says this gives rust and scratch resistance. After each session, wipe the table down and empty the reservoir to protect it. The saw also has a reset safety switch. VEVOR says it prevents accidental activation when power is interrupted and restored, so the blade won't start up unexpectedly. Keep hands away from the blade, and unplug the saw when changing the blade or cleaning.

Size and weight

The saw measures about 13 x 14 x 6.6 inches and weighs 20.2 lb (around 9 kg). It is compact enough to carry between jobs and keep in a garage, but the small table limits the size of tile you can support. Large-format tiles are usually better cut on a bigger saw with a longer table.

Who it suits

It suits homeowners tiling a bathroom, backsplash or small floor, and people who need occasional straight cuts and 45-degree mitres in standard tile sizes. For regular professional work or large-format tiles, a bigger saw is the usual choice.

What to check before you buy

• Tile size: compare your tiles with the table size and the 1.25-inch cutting depth.
• Blade type: confirm the fitted blade suits your material (ceramic, porcelain or stone).
• Water supply: plan for filling the reservoir, managing slurry and cleaning up.
• Power: check the voltage and a suitable outlet; use a wet-location-safe supply if needed.
• Protective gear: use eye, ear and dust protection.
• Setup: read the manual for blade fitting and alignment.

The short version

• Compact 7-inch wet tile saw with a 3500 RPM induction motor.
• 65Mn steel blade, 1.25-inch (31 mm) maximum cutting depth.
• 0-45 degree mitre, removable PP water reservoir.
• Galvanized table and a reset safety switch.
• About 20 lb, suited to DIY tiling projects.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.