VEVOR SL-1930 18V Mini Press Tool: features, specs and who it suits

The VEVOR SL-1930 is a cordless 18V press tool for joining copper pipe with press fittings. Instead of soldering a joint with a torch, the tool squeezes a fitting onto the pipe in a few seconds. The kit comes with three jaws, two batteries, a charger and a carrying case, so it is set up for plumbing jobs from the start.

How press fitting works

A press fitting is a copper fitting with a seal ring inside. The tool's jaws close around it and deform it onto the pipe, forming the joint mechanically. Compared with soldering, there is no open flame, which is why press tools are common in places where heat work is awkward. Fittings come from several makers, and each system specifies compatible jaw profiles, so match the jaw shape to the fittings you plan to use.

Jaws and pipe sizes

The kit includes three jaws for 1/2 inch, 3/4 inch and 1 inch copper pipe, which covers many residential supply lines. VEVOR says the jaws are forged from high-strength steel with heat-treated hardening to extend their working life. The head rotates 360 degrees, which helps when you are working overhead or in a tight space. A safety pin locks the jaws in place.

Speed and stroke

VEVOR says each crimping cycle takes 2 to 4 seconds, with a 30 mm stroke, and that the tool returns automatically to its starting position afterwards. That return makes repeat joints quicker, since you don't have to reset anything by hand.

OLED display and batteries

An OLED display shows battery level, working status and crimping data. The kit includes two 18V 2.0Ah batteries, and VEVOR says one full charge allows up to 180 crimps. Real numbers will vary with jaw size, temperature and battery age. Two batteries let you keep one charging while you work with the other.

Size and weight

The listing gives 22.7 lb for the whole kit, which includes the tool, batteries, jaws, charger and case. VEVOR describes the tool itself as compact, with an ergonomic handle, for tight spaces and overhead work.

Who it suits

It suits plumbers and serious DIYers who make a lot of copper joints and want to skip soldering. It is for copper pipe within the listed sizes. VEVOR describes it as suitable for residential and other industrial applications.

What to check before you buy

• Fittings: confirm the jaw profile matches the press fittings you intend to use. Pressing with the wrong jaw can give a poor joint.
• Pipe sizes: the kit covers 1/2, 3/4 and 1 inch copper only.
• Codes and approvals: check that press fittings and your method meet local plumbing codes, and follow the manual.
• Battery compatibility: the batteries and charger are included, but confirm they suit your power supply.
• Maintenance: look at the manual for cleaning and checking the jaws, and for any service intervals.
• What's in the box: VEVOR mentions purchase guide images in the listing, so look them over.

The short version

• A cordless 18V press tool for copper pipe with three jaws (1/2, 3/4, 1 inch).
• 2 to 4 second cycles with a 30 mm stroke and automatic return.
• Head rotates 360 degrees; safety pin locks the jaws.
• OLED display for battery level, status and crimp data.
• Two 2.0Ah batteries, a charger and a carrying case; VEVOR cites up to 180 crimps per charge.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.