VEVOR AL-1632 Hydraulic Copper Pipe Crimping Tool: specs and who it suits

The VEVOR AL-1632 is a hydraulic press tool for joining copper pipe with crimped (pressed) fittings. Instead of soldering with a torch, you slide a fitting onto the pipe and the tool compresses it into a sealed joint. It comes as a kit with three jaw sizes, a pipe cutter, a deburring tool and a carrying case.

How press fittings and a crimper work

Press-style copper fittings contain a sealing ring. When a jaw is closed around the fitting, the tool applies force that deforms the fitting onto the pipe and compresses the seal. VEVOR says its hydraulic system delivers consistent, uniform pressure for fast, leak-free crimps. In general, a press joint is quicker than soldering and avoids open flame, which is useful in occupied buildings or near wood framing. The tool needs to be paired with fittings made for pressing, and jaw profiles need to match the fitting system, so check compatibility.

Three jaw sizes

The kit includes interchangeable jaws for 1/2", 3/4" and 1" copper pipe. Those are among the most common sizes in residential plumbing, covering many supply lines. Changing the jaw adapts the tool to each pipe diameter, so one tool serves several tasks.

Handle, grip and rotating head

VEVOR describes a durable aluminium alloy handle with a non-slip rubber grip. A 360° rotating head lets you position the jaws in narrow or awkward spaces, such as between joists, behind a fixture or close to a wall. VEVOR says it handles straight and bent fittings. At 11.0 lb (about 5 kg), it is manageable for one person, though still a weight to hold overhead for long.

What's in the kit

Beyond the crimper and the three jaws, the set includes:

• one copper pipe cutter
• one deburring tool
• one carrying case

Cutting, deburring and crimping are the three steps in preparing and joining a pipe. Deburring matters because a rough cut edge can damage the seal ring as the fitting slides on. The case keeps the jaws together for transport and storage.

Where it is used

VEVOR lists residential plumbing, HVAC systems and industrial piping projects, for both installation and repair. The listing does not give dimensions for the tool itself.

Who it suits

It suits plumbers, HVAC technicians and capable renovators who do enough copper work to prefer press fittings over soldering. For a single small repair, the cost of fittings and tooling may matter to you more than speed, so think about how often you'll use it.

What to check before you buy

• Fitting system: confirm the jaw profile matches the press fittings you plan to use.
• Pipe sizes: the kit covers 1/2", 3/4" and 1" only.
• Codes and approvals: check that local codes and your fittings' manufacturer permit pressed joints for your application, and follow the manual.
• Pipe preparation: cut square, deburr and clean each end before pressing.
• Maintenance: keep the jaws clean and follow the manual on servicing the hydraulics.
• Space: think about the clearance around the joint you need to reach.

The short version

• A hydraulic copper pipe press tool, model AL-1632.
• Three jaws: 1/2", 3/4" and 1".
• 360° rotating head, aluminium alloy handle and non-slip grip.
• Includes a pipe cutter, deburring tool and carrying case.
• About 11.0 lb; for residential plumbing, HVAC and industrial piping.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.