VEVOR AH081036 36-Inch Farm Jack: 7,000 lb capacity and how it's used

The VEVOR AH081036 is a 36-inch high-lift farm jack, a manual ratcheting jack with a tall steel beam. It is used on farms, in workshops and for off-road recovery, where a normal floor jack either does not reach high enough or cannot sit on soft ground.

How a high-lift jack works

A farm jack lifts by ratcheting a steel climbing pin up a perforated beam. A handle drives the mechanism, and a lever switches between raising and lowering. Because the lift comes from the beam and not a hydraulic ram, the range is long, and the same tool can be used for several tasks. VEVOR lists lifting, pulling, clamping, winching and spreading as possible uses.

Capacity and range

VEVOR rates the jack at 7,000 lbs (3.18 tons). The lifting range is 5.12 to 30.3 inches (about 130 to 770 mm), which the brand says suits small vehicles through to large equipment. It is operated manually, so lifting takes effort, and the height is set in steps as the ratchet moves.

The jack is described as suitable for steel-bodied SUVs. A high-lift jack needs a solid lifting point on the vehicle, so check whether your vehicle has bumpers or rock sliders made for that purpose.

Construction

The structure is high-quality structural steel, which VEVOR says passed 50,000 lifting tests without deformation. A galvanized anti-rust coating is meant to resist rough, wet and off-road conditions. A rubber handle grip is there to reduce hand fatigue on longer jobs. The jack measures about 5.1 x 9.4 x 36.0 inches and weighs 24.0 lb (about 10.9 kg).

Safe handling in general

High-lift jacks have a reputation for being unstable if used carelessly. The load can shift, and the handle can swing back quickly. In general, the jack should stand on firm, level ground or a wide base plate, the load should be lifted at the manufacturer's lifting points, and nobody should work under a load held by a jack alone. Support the load with proper stands, and follow the manual.

Who it suits

It suits farm and ranch owners, off-road drivers and workshop users who need a long-reach manual lifting tool. For routine garage tyre changes, a conventional jack is usually simpler and more stable.

What to check before you buy

• Vehicle fit: confirm the vehicle has suitable lifting points, and that the 7,000 lb capacity covers the load.
• Height: compare the 5.12-30.3 inch range with the heights you need.
• Ground: plan for a base plate on soft ground.
• Experience: learn the handle and lever operation before using it on a real load.
• Upkeep: keep the beam and mechanism clean and lightly lubricated, as the manual describes.
• Support: use jack stands or other approved supports before working beneath anything.

The short version

• A 36-inch ratcheting high-lift farm jack, model AH081036.
• Rated at 7,000 lbs (3.18 tons) with a 5.12 to 30.3 inch lifting range.
• Structural steel with a galvanized anti-rust coating.
• Rubber handle grip; weighs 24.0 lb.
• Listed for lifting, pulling, clamping, winching and spreading.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.