VEVOR AH081033 33-Inch High Lift Farm Jack: capacity, range and uses

The VEVOR AH081033 is a 33-inch, manually operated high lift farm jack. It is a ratcheting steel jack rated at 3.18 tons (7,000 lb), made for lifting trucks, SUVs and tractors where a typical floor jack cannot reach or the ground is rough. Here is what the specifications mean and where a jack like this fits.

What a high lift jack is

A farm jack, or high lift jack, is a tall steel bar with a lifting mechanism that climbs along perforated holes in the beam. A handle works a ratchet, which raises the load one notch at a time. Because the lift range is long, it can raise a vehicle much higher than a hydraulic floor jack. It is popular for off-road vehicles with raised suspension and for farm equipment, and VEVOR also lists pulling, clamping, winching and spreading as possible uses.

Capacity and lifting range

VEVOR rates the jack at 3.18 tons (7,000 lb). The lifting range is 5.12 to 28 inches (about 130 to 711 mm) on a 33-inch beam, and the unit weighs 23.1 lb (about 10.5 kg). The listing gives the base footprint as roughly 5.1 x 9.4 inches.

The rated capacity is a maximum for the jack under correct use, and it applies to the load on the jack, not necessarily to the whole vehicle weight. A jack lifts only part of a vehicle at a time, but you should still compare the figure to the weight carried at the lift point and leave a margin.

Build and finish

The jack is made from structural steel and, VEVOR says, passed 50,000 lifting tests without deformation. A galvanized anti-rust coating is meant to handle mud, moisture and rough environments. A rubber-covered handle is included to reduce fatigue during longer jobs.

Where it is used

Typical uses include vehicle repairs on uneven ground, changing wheels on lifted trucks, recovering a vehicle that is stuck, and moving heavy equipment on farms and in workshops.

Using any jack with care

High lift jacks are tall and can be unstable on soft or sloping ground, and a ratcheting handle can swing quickly if the load shifts. As standard practice, use a firm, level surface, a solid lift point recommended by the vehicle's manufacturer, and always support the raised load with jack stands rather than working under a jack. Read the manual before the first lift.

Who it suits

It suits owners of trucks and SUVs used off-road, farm and ranch users, and workshops that need a portable manual lifting tool. Drivers of low passenger cars who only change tyres at home may find a conventional jack more suitable.

What to check before you buy

• Vehicle fit: confirm the vehicle has suitable lift points, such as sturdy bumpers or rock sliders, which may need to be rated for this kind of lifting.
• Capacity: compare the 7,000 lb capacity to the load at the lift point.
• Height range: the jack starts at 5.12 inches, so check it fits under your vehicle's lift point.
• Ground: a base plate or board may be needed on soft ground.
• Support equipment: have jack stands or blocks ready.
• Upkeep: keep the mechanism clean and lightly lubricated as the manual suggests.

The short version

• A 33-inch manual ratcheting high lift jack rated at 3.18 tons (7,000 lb).
• Lifting range of 5.12 to 28 inches.
• Structural steel with a galvanized coating and a rubber handle.
• Aimed at off-road vehicles, farms and workshops.
• Use on firm ground and support the load with stands, following the manual.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.