VEVOR 42-Inch Structured Media Enclosure: features, specs and who it suits

The VEVOR SPT1063609-A is a 42-inch structured media enclosure: a steel box that sits inside a wall and holds home network and entertainment equipment. It solves the problem of routers, switches and streaming boxes sitting in view with cables everywhere, by gathering them behind one door.

What a structured media enclosure does

A media enclosure is a recessed cabinet that goes between wall studs. Cables from around the house run into it, and the equipment that connects them lives inside. VEVOR says this one has room for routers, switches, soundbars, streaming devices such as Roku or Apple TV, and AV receivers. Keeping it all in one place makes the wiring easier to follow when something needs changing.

Cable knockouts and routing

Knockouts are pre-marked circular sections of the steel that you remove where a cable or conduit needs to enter. The listing gives these on the top of the box:

• three 2.36 in (60 mm) knockouts
• four 1.97 in (50 mm) knockouts
• six 1.57 in (40 mm) knockouts

There are also two reserved knockouts for outlet boxes, so power can be brought in beside the equipment. Larger knockouts typically suit conduit or bundles of cable, and smaller ones suit single runs. Pick the size that matches the conduit or fitting you plan to use.

Steel construction and heat

The enclosure is made from cold-rolled steel. VEVOR says this gives strength and helps dissipate heat, and the door is vented. Network gear and receivers give off warmth, so airflow matters in a closed box. As a general rule, leave space around devices rather than packing them tightly.

Fitting it into the wall

VEVOR says the box is sized for 16-inch stud spacing and suits both new construction and renovation. Since it is recessed, it sits between two studs, which means the wall cavity has to be clear of pipes, wiring and other obstacles at the chosen spot. The hinged door is described as covering irregular cut edges around the opening, which helps give a tidy finish if the drywall cut isn't perfect.

Door and lock

The hinged door opens to 120 degrees for access to the equipment. It has a key lock, which VEVOR says keeps unauthorised people and young children from tampering with the equipment. A key lock is a simple deterrent rather than a security system.

Who it suits

It suits homeowners wiring a new build, people renovating who want to centralise their network, and home theatre setups with several components. It is less suited to a wall with no free stud cavity or to equipment too deep for the enclosure.

What to check before you buy

• Interior size: compare the box's inside dimensions with your equipment, including cable bend room. The listing doesn't give full dimensions, so confirm them with the brand.
• Wall: check stud spacing and what is inside the wall where you want it.
• Power: decide where outlets will go and use the reserved knockouts accordingly. Follow local electrical codes and have the work done by a qualified electrician if required.
• Heat and signal: consider airflow, and that a metal enclosure can weaken Wi-Fi signal from a router mounted inside.
• What's in the box: check which mounting parts and accessories are included.

The short version

• A 42-inch recessed media enclosure for routers, switches and AV equipment.
• Cold-rolled steel body with a vented, hinged door that opens to 120 degrees.
• Three 60 mm, four 50 mm and six 40 mm knockouts, plus two for outlet boxes.
• Sized for 16-inch stud spacing; the door has a key lock.
• Check interior size, wall space and local electrical codes first.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.