VEVOR 100 ft Auto-Feed Drain Cleaner Machine: features, specs and uses

The VEVOR RC-9001 is an electric drain cleaning machine, often called a sewer snake or drain auger. A motor spins a long steel cable inside a pipe so a cutter on the end can break through roots, grease and other blockages. This model carries 100 feet of 1/2 inch cable and feeds it automatically, so one person can work it without hauling cable by hand.

What the cable and cutters do

The cable is a steel core, 100 ft long and 1/2 inch thick. VEVOR describes it as resistant to breakage, twisting and corrosion, and says it suits pipes from 2 to 4 inches in diameter. In general, a thicker cable is stiffer and pushes further, but it needs a wider pipe to turn through bends.

Four interchangeable cutters are included: an arrow cutter, a spade cutter, a C-cutter and a boring bulb cutter. As a rule, narrow heads punch a hole through a plug, while wider heads scrape the pipe wall once there is a path. VEVOR lists use in pipes, floor drains, sinks and toilets.

Auto feed and the foot switch

A powered feed system pushes the cable into the pipe and pulls it back out. A CW/OFF/CCW knob sets the drum direction: clockwise, off or counter-clockwise. An air-activated foot switch starts and stops the cable, which leaves both hands free to guide it. VEVOR says this lets a single operator clear a blockage with less effort than a manual-feed machine.

Motor, drum and frame

The motor runs at 1800 RPM. The drum is semi-enclosed, so you can see how much cable is left, and the steel frame has a coating VEVOR says resists rust. A built-in GFCI (ground fault circuit interrupter) is part of the electrical protection. A GFCI cuts power quickly if it detects current leaking to ground, but it is not a substitute for following the manual.

Size and moving it around

The machine measures about 18.7 x 22.8 x 36.2 inches (roughly 47 x 58 x 92 cm) and weighs 109 lb (about 49 kg). VEVOR calls it compact, and it has 8-inch shock-absorbing wheels for stairs and uneven ground, plus a retractable handle that also makes storage easier. At that weight, loading it into a vehicle usually takes two people.

Who it suits

It is aimed at plumbers, property managers and facilities staff, as well as home owners with long runs of drain line. VEVOR names homes, restaurants, factories and schools as places to use it. Occasional users with a single sink clog may find a smaller hand-cranked tool enough.

What to check before you buy

• Pipe size: confirm your lines are 2 to 4 inches in diameter.
• Reach: measure or estimate the distance from your access point to the blockage; 100 ft is the cable length.
• Access point: a cleanout, floor drain or removed toilet is typically needed to feed the cable in.
• Power: it needs a suitable outlet; use the GFCI as the manual directs and avoid wet extension cords.
• Weight and storage: 109 lb needs a flat path and a place to keep it.
• Protective gear: follow the manual on gloves, eye protection and keeping clothing away from the spinning cable.
• Upkeep: check the manual on cleaning the cable and drum and replacing cutters.

The short version

• Electric drain auger with 100 ft x 1/2 inch steel core cable for 2 to 4 inch pipes.
• Automatic cable feed, a CW/OFF/CCW knob and an air-activated foot switch.
• Four cutters: arrow, spade, C-cutter and boring bulb.
• 1800 RPM motor, semi-enclosed drum, rust-resistant frame and integrated GFCI.
• About 109 lb with 8-inch wheels and a retractable handle.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.