VEVOR 1 Ton Hand Chain Hoist: 2200 lb capacity, G70 chain and who it suits

The VEVOR 1 Ton Hand Chain Hoist is a manual chain block for lifting and lowering heavy loads by hand. It has no motor, no fuel and no power cord. You pull the hand chain, and a gear system inside the hoist raises the load on the lifting chain. People use this kind of tool in garages, workshops, warehouses and on construction sites.

What a 1-ton capacity means

VEVOR rates the hoist for 1 ton, which is 2200 lb, with a lifting height of 10 ft (3 m). The capacity is a maximum for the hoist working as designed, not a target. In general, it is sensible to keep loads well within the limit, to account for the weight of rigging and any shock when a load starts to move. Lifting equipment should also be hung from an anchor point that is itself rated for the load, and the manual and local rules and codes should be followed.

How a manual chain hoist works

A chain hoist is a gear reduction system. The pull on the hand chain turns a gear train that moves the lifting chain a much shorter distance, so a small effort moves a large load. VEVOR says the hoist needs 329N of force at full load, which is about 33 kg-force. The brand also mentions smooth ball bearings, and a deep-groove design intended to keep the chain from slipping.

The load brake

VEVOR describes a mechanical load brake that holds the load in place when you stop pulling. This is a key feature of any manual hoist: the brake is what keeps a raised load where you left it instead of letting it run back down. Always check that the brake works as the manual describes before you put a load on it, and never stand beneath a suspended load.

Materials and chain

The body is alloy steel with a reinforced casing. The chain is G70, a grade that, in general, is a heat-treated, higher-strength transport and lifting chain, and VEVOR lists it as galvanized, a zinc coating that helps resist corrosion. As with any chain, inspect links regularly for wear, stretch or damage, as the manual advises.

Rotating hooks and safety latches

Both hooks rotate 360°, which makes it easier to line the hoist up with the anchor point and the load without twisting the chain. VEVOR also lists a hook security lock (latch) to help keep slings or rigging seated in the hook, and an adjustable lifting angle intended to avoid tangles.

Size and weight

The hoist is compact, at about 9.8 x 6.7 x 6.1 inches, and weighs 17.2 lb (about 7.8 kg). That makes it manageable for one person to hang, though a full chain length adds to the handling weight.

Who it suits

It suits home garages, workshops and farms for jobs such as engine and equipment handling, and warehouse or site crews who need a portable lifting aid where power isn't available. Because it is manual, it is slower than an electric hoist but simpler and quiet.

What to check before you buy

• Capacity: work out the real weight of what you'll lift, with rigging, and stay within the limit.
• Lift height: 10 ft (3 m) is the listed height, so check it against your clearances.
• Anchor point: confirm that the beam, trolley or frame you'll hang it from is rated for the load.
• Rigging: check slings, shackles and hooks are also rated for the job.
• Inspection and care: read the manual on lubrication, inspection and when to retire the chain.
• Training: follow the manual and any local rules for overhead lifting.

The short version

• A manual 1-ton (2200 lb) chain hoist with a 10 ft lifting height.
• Mechanical load brake and 329N effort at full load, according to VEVOR.
• Alloy steel body and G70 galvanized chain.
• Two 360° rotating hooks with a security lock.
• Compact, 17.2 lb, and needs no power.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.