VEVOR 1/8 HP Condenser Fan Motor with Capacitor: specs and fit guide

The VEVOR YDK90-8G03 is a replacement condenser fan motor rated at 1/8 HP, 825 RPM and 208–230 volts, and it comes with a capacitor. A condenser fan motor drives the fan on the outdoor unit of an air conditioner or heat pump, which pulls air across the coil to release heat. When it fails, the unit can overheat or stop cooling, so it is a common part to replace.

The electrical specs

VEVOR gives these figures:

• Power: 1/8 HP, 60 Hz.
• Voltage: AC 208–230V, single phase.
• Speed: 825 RPM.
• Rated current: 0.75 A.

The speed, voltage and horsepower must all match the original motor. A mismatch can change airflow or damage the motor, so always compare them with the nameplate on the unit you are replacing.

Part numbers it replaces

The listing names a long set of cross-reference numbers, including 5KCP39KFUA99S, 5KCP39GGV570S, D159176P01 and X70370245010, along with a series of MOT-numbered parts. Brands such as GE Genteq, Carrier, Bryant and Payne are named in the listing as compatible. Match the number printed on your existing motor to this list, because a similar-looking motor may differ in shaft, speed or mounting.

Mounting and shaft

The motor uses a 48Y frame, with a 2 inch shaft length and a 0.5 inch shaft diameter. VEVOR says rotation is reversible (CCW or CW), so one motor can fit units that turn either way. A 47 inch cut-to-length wire is included for wiring. Note the rotation direction and wire connections of your old motor before removing it, and photograph the wiring.

The capacitor

VEVOR says replacing the motor also calls for replacing the capacitor, and includes one capacitor described as explosion-proof. A run capacitor helps the motor start and run steadily, and an aged capacitor is often a cause of motor failure. Check that the capacitor's microfarad and voltage values match your unit's specification.

Build

The listing mentions a pure copper coil, stainless steel bearings, overload protection that resets automatically, and weather-resistant construction for ambient temperatures up to 40°C (104°F). It weighs 9.9 lb (about 4.5 kg), and its size is 5.6 x 5.6 x 6.3 inches.

Who it suits

This part suits HVAC technicians and capable do-it-yourselfers replacing a failed outdoor fan motor. Work on air conditioners involves high voltage and stored charge in capacitors. Disconnect power at the breaker and the disconnect, discharge the capacitor correctly, and follow local electrical codes and the manufacturer's manual, or hire a qualified technician.

What to check before you buy

• Nameplate match: HP, RPM, voltage, frame, shaft size and rotation.
• Part number: your old motor's number against the cross-reference list.
• Fan blade fit: shaft diameter and the blade's hub, plus the mounting bracket.
• Capacitor values: compare with the existing one.
• Wiring: colours and connections on your unit.
• Warranty and certifications: check what the supplier states.

The short version

• A 1/8 HP, 825 RPM, 208–230V single-phase condenser fan motor, 0.75 A.
• 48Y frame, 2 in x 0.5 in shaft, reversible rotation, 47 in wire.
• Includes a capacitor.
• Listed as a replacement for many GE Genteq, Carrier, Bryant and Payne part numbers.
• Always match the nameplate and follow electrical safety procedures.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.