Home / Tech · Product overviews / Home Audio
PEGZONE Height-Adjustable Speaker Stands for Sonos Era 100 and Era 300
PEGZONE speaker stands made for Sonos Era 100 and Era 300: adjustable from 26.9 to 42 inches, with cable management and a 4-screw setup. Fit and specs explained.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
These PEGZONE speaker stands are sold as a pair and made to hold Sonos Era 100 and Era 300 speakers. They lift the speakers off the floor or a shelf to a height you choose, and hide the cables inside the pole. This page explains what the features mean and what to confirm before setting them up.
What they are for
A compatible stand is an accessory: it is not a speaker, and it needs a Sonos Era 100 or Era 300 to be useful. PEGZONE says the base and mounting interface are built around the dimensions and design of the Era series, so the speaker fits without adapters. A purpose-made mount typically helps a speaker sit stable and level, which matters more with a tall, narrow stand.
Height from 26.9 to 42 inches
The stands adjust from 26.9 to 42 inches (about 68 to 107 cm). That range lets you set the speaker closer to ear height, whether you're on the sofa, at a desk or watching a film. In general, a speaker that points toward where you sit sounds clearer than one aimed at the floor or a wall. For surround use, speakers are commonly placed to the sides or behind the listening position, and a stand makes that possible without wall mounting.
Cable management
The pole conceals the power cable inside it, so wires don't trail across the floor. PEGZONE describes this as keeping the setup tidy. Check how the cable enters at the top and exits at the base, and that its length reaches both the speaker and your outlet.
Vibration and stability
PEGZONE says the design reduces unwanted vibration, giving a solid foundation that helps preserve clarity. As a general principle, a firm, level base stops a speaker from rattling against furniture, though results depend on the floor, the speaker's placement and the volume.
Installation
Assembly takes four screws, according to PEGZONE, with a printed manual and a step-by-step installation video. Tightening all four fully is what makes the stand rigid, so take care to follow the order in the instructions.
Weight capacity
The listing gives a capacity of 11 lb. Check that against the weight of the speaker you plan to use, as the specifications of the Sonos Era 100 and Era 300 differ and are found in the Sonos documents. The stand is sold in white.
Who it suits
It suits owners of Era 100 or Era 300 speakers who want them at a better height, as a stereo pair or a rear surround pair, without drilling into walls. It suits rooms where tables and shelves aren't in the right place.
What to check before you buy
- Weight: compare the speaker's weight with the 11 lb capacity.
- Speaker model: the stands are listed for the Era 100 and Era 300, so check compatibility if you own another model.
- Floor type: hard floors and carpet may need different feet or pads; check what is supplied.
- Placement: keep the stands away from walkways, pets and small children, as tall stands can be knocked.
- Cable length: confirm the cord reaches from the speaker to your outlet through the pole.
- Quantity: the listing is for a pair, so one pair serves two speakers.
The short version
- A pair of white speaker stands designed for Sonos Era 100 and Era 300.
- Height adjusts from 26.9 to 42 inches.
- Cable management runs inside the pole.
- Four-screw installation with a manual and an installation video.
- Listed with a capacity of 11 lb.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
