PEGZONE HW1263WT 24-Inch Clamp-On Desk Extender Tray: specs and fit

The PEGZONE HW1263WT is a clamp-on shelf that extends the front or side of a desk. At 24 by 12 inches (about 61 x 30 cm), it adds surface area for a keyboard and mouse, a laptop, a printer or office supplies, without replacing the desk you already have.

How a clamp-on extender works

Instead of screws, the tray attaches with a clamp that grips the desktop edge from above and below. That makes it quick to fit and easy to remove, and PEGZONE describes the installation as damage-free. It can be mounted on the front of the desk, where it works like a keyboard tray, or on the side, where it acts as a shelf or equipment stand.

Load capacity

PEGZONE rates the extender at up to 55 lb (about 25 kg), and the tray itself weighs 9.5 lb (about 4.3 kg). That figure is a maximum for evenly spread weight, so heavy items are best placed toward the clamp and not out at the far edge. Remember that the desk also takes this load. A lightweight or thin desktop may flex.

Storage drawer

The tray has a built-in drawer for pens, cables and small accessories. PEGZONE says the drawer has a safety design that keeps items from falling out. A drawer under the surface is handy for keeping small things off the work area.

Arm support and comfort

PEGZONE says the extender doubles as a desk armrest, and the edges are rounded to avoid scratches and bumps. The brand says it supports the arms and improves overall comfort. Everyone's setup differs, so adjust chair and screen heights as you normally would.

Sizes and colours

The listing says it comes in black, white and walnut, and in medium and large sizes. This is the medium, 24 x 12 inch version in walnut.

Will it fit your desk?

The clamp fits desks 0.6 to 2.4 inches thick (about 1.5 to 6 cm) and at least 22 inches wide. PEGZONE says it is not compatible with raised, beveled or irregular desktop edges. The clamp needs a flat, straight edge to hold, so check the underside too, since drawers, rails or braces close to the edge may be in the way.

Who it suits

It suits home and office workers who need more surface for a keyboard, mouse or laptop, people sharing a small desk, and anyone who wants a simple storage spot at the desk edge.

What to check before you buy

• Desk thickness: measure between 0.6 and 2.4 inches.
• Desk width: it must be at least 22 inches.
• Edge shape: the edge should be flat and square, not curved, beveled or lipped.
• Underside clearance: check that nothing under the desk blocks the clamp.
• Weight: think about how much you will put on the tray, and whether your desk can carry it.
• Legroom: a front-mounted tray changes where your knees and chair sit.

The short version

• A 24 x 12 inch clamp-on desk extender in walnut, 9.5 lb.
• Load capacity of up to 55 lb, according to PEGZONE.
• Built-in storage drawer and rounded edges.
• Fits desks 0.6 to 2.4 inches thick and at least 22 inches wide.
• Not suited to raised, beveled or irregular desk edges.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.