BOYA BOYALINK 2 wireless lavalier microphone: features and who it suits

The BOYA BOYALINK 2 is a wireless clip-on microphone system for phones, cameras and computers. It has a small transmitter that clips to clothing, a receiver that plugs into the device, and a charging case that holds both. Here is what the main specs mean for recording.

One receiver, three connectors

The receiver comes with a 3-in-1 adapter: Lightning, USB-C and 3.5mm TRS, stored in the kit. That covers recent iPhones, many Android phones, and cameras or computers with a mic jack. Switching is a matter of changing the adapter. A 3.5mm TRS input varies between cameras, so check yours, and note that some phones need an app that accepts an external microphone.

Pickup and sound quality

BOYA fits a 6mm microphone capsule with 360° omnidirectional pickup. Omnidirectional means the mic picks up sound from every direction, so placement matters: clipped about a hand's width below the chin, it stays close to the voice and lowers room noise.

The audio is 48kHz/24-bit with a 20Hz-20kHz frequency response. That is the standard video sample rate, and the frequency range covers what the human ear generally hears. BOYA lists the maximum sound pressure level at 120dB SPL, which suggests it can handle loud voices without distorting.

Noise reduction

BOYA lists a signal-to-noise ratio above 85dB and DSP noise cancellation with two levels, strong and weak. Software noise reduction generally helps with steady background sound like fans or traffic, though stronger settings can make a voice sound slightly processed. Windproof fur covers are included for outdoor use.

Range and latency

The listed transmission range is up to 1000 ft (about 300 m) in line of sight, with 25ms latency. Line of sight means with no walls or obstructions, so real-world distances are often shorter. Latency of 25ms is generally short enough that sound and picture stay in sync in video.

Battery and charging

BOYA lists up to 30 hours of use with the 1000mAh charging case, which fully recharges the set twice. A full charge takes about 1.5 hours, and a transmitter runs for up to 10 hours. The system can also charge the phone while in use.

Pairing and controls

Opening the charging case pairs the transmitters and receiver automatically. There are six volume levels, each a 6dB step, shown by LED indicators. The BOYA app provides further control, and there's a mute function, plus playback without unplugging.

Size

The case measures about 4.4 x 2.9 x 1.3 inches (11 x 7.4 x 3.3 cm) and weighs about 0.3 lb (136 g), which fits a pocket or camera bag.

Who it suits

It suits people recording interviews, vlogs, tutorials, livestreams or talking-head clips on a phone or camera, who want the speaker free of cables.

What to check before you buy

• Your device: the port type (Lightning, USB-C or 3.5mm) and whether your recording app accepts an external mic.
• Number of speakers: how many transmitters are in the set you buy.
• Environment: wind and clothing noise; use the fur cover and clip placement.
• Charging: how you'll charge the case on location.
• Range: distances in your real setting, which can include walls.
• Cases: if your phone case blocks the connector.

The short version

• A wireless lavalier set with a 3-in-1 adapter for Lightning, USB-C and 3.5mm TRS.
• 6mm omnidirectional capsule, 48kHz/24-bit audio and 20Hz-20kHz response.
• Two-level DSP noise cancellation and fur windscreens.
• Up to 1000 ft in line of sight, 25ms latency.
• Up to 30 hours of use with the charging case.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.