bloiq.

Guides to buying well and travelling well

Home / Tech · Product overviews / Computers & Accessories / Internal Power Supplies · More from ASUS

ASUS ROG Strix 1200W Platinum power supply: ATX 3.1 features and specs

A fully modular 1200W ATX 3.1 power supply from ASUS with 80 Plus Platinum certification, a native 12V-2x6 connector, GaN MOSFETs and 0dB mode.

This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.

The ASUS ROG Strix 1200W Platinum is a fully modular ATX power supply for high-end gaming PCs. It delivers up to 1200 watts, meets the ATX 3.1 standard and has a native connector for the newest graphics cards. This page explains what the main features mean and what to confirm before fitting one.

What 80 Plus Platinum means

80 Plus is a voluntary efficiency certification. Platinum is one of the upper tiers, and it means the supply converts mains power to the PC's DC power with limited loss at test loads. In general, higher efficiency means less heat wasted inside the unit and less work for the fan. ASUS says the unit uses low-ESR capacitors and premium components to reach that level.

GaN MOSFETs

The power supply uses gallium nitride (GaN) MOSFETs. ASUS says they improve power efficiency by up to 30% and allow a more organized internal layout for cooler operation. GaN switches are known in general for lower switching losses than traditional silicon parts, but the 30% figure is ASUS's own and applies to the specific parts it compares.

ATX 3.1 and the 12V-2x6 connector

ATX 3.1 is an update to the power supply standard that, among other things, tightens how supplies handle brief power spikes from modern graphics cards. The ROG Strix Platinum is listed as compliant, with a native 12V-2x6 connector, which is the cable standard for high-power graphics cards, labelled "PCIe 5.0 Ready". A native connector means the supply can feed such a card through one cable, without a multi-plug adapter. Check which connector your graphics card uses.

GPU-First voltage sensing

ASUS says a patented, intelligent voltage stabilizer senses voltage at the graphics card first and enhances voltage delivery to it by up to 45%, for steadier gameplay. As with the other figures, this is the brand's claim, tied to its own test conditions.

Cooling and noise

Large ROG heatsinks cover critical components, which ASUS says gives lower temperatures and noise than reference designs. The fan uses dual ball bearings, which the brand says can last up to twice as long as sleeve bearings. A 0dB mode keeps the fan off at light loads, so the PC can run in relative silence during light tasks. Under heavy load the fan will spin up as normal.

Fully modular cables

Fully modular means every cable detaches from the power supply, so you connect only what the build needs. This usually makes cable routing tidier and improves airflow in the case. Cable types and counts vary, so check the contents list against your components.

Size and warranty

The listing gives dimensions of 6.3 x 5.9 x 3.4 inches (16 x 15 x 8.6 cm) and a weight of 8.0 lb (about 3.6 kg). A ten-year warranty is included.

Who it suits

It suits builders of high-end gaming or workstation PCs with a powerful graphics card and processor, and those who want a quiet-at-idle supply with modern connectors. A 1200W unit gives headroom, though a smaller capacity is enough for many systems.

What to check before you buy

  • Total power need: add up your processor and graphics card requirements and match them to the supply with headroom, using the manufacturers' guidance.
  • GPU connector: confirm whether your card uses a 12V-2x6 (or 12VHPWR) connector or needs PCIe 8-pin cables.
  • Case fit: check that your case supports an ATX power supply of this size, with space for the cables.
  • Cable count: make sure the box has enough connectors for your drives and parts.
  • Mains supply: confirm that the input voltage range fits your region, and follow the manual and local electrical codes when installing.
  • Installation: turn off and unplug the PC before swapping a power supply, and follow the manual.

The short version

  • A fully modular 1200W ATX 3.1 power supply, model ROG-STRIX-1200P-GAMING.
  • 80 Plus Platinum certified, with GaN MOSFETs and large heatsinks.
  • Native 12V-2x6 connector for next-generation graphics cards.
  • GPU-First voltage sensing, dual ball-bearing fan and a 0dB mode.
  • Ten-year warranty as listed by ASUS.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.

Keep reading