Home / Outdoor & Garden · Product overviews / Pools, Hot Tubs & Supplies · More from VEVOR
VEVOR FlashPure 12-Inch Sand Filter Pump HCP370A-F: specs and fit
A one-piece 12-inch pool sand filter with a 0.5 HP pump, 3,000 GPH flow, pre-installed filter media and a 24-hour timer for above-ground pools.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR FlashPure (model HCP370A-F) combines a pool pump and a 12-inch filter tank in one unit. It is designed for above-ground pools, where it pulls water through a filter bed to trap debris, then returns the water to the pool. VEVOR sells it ready to run, with the filter media already inside.
How a sand filter system works
A pump draws pool water through a tank filled with filter media. Particles lodge in the bed and the cleaner water goes back to the pool. Over time, the bed gets dirty and flow slows, which is the point at which most systems call for backwashing or media replacement, as the manual describes. A one-piece unit like this one places the pump and filter together, so there are fewer separate parts to connect.
Filter balls instead of silica sand
VEVOR says the unit is supplied with filter media in place, so there is no need to add sand separately. The listing refers to filter balls that it says are easier to replace than silica sand, and it claims 6X faster filtration than a standard silica sand pump. That comparison is the brand's own figure. Different media have different particle-capture characteristics, so check what the manual says about media life and replacement.
Motor and flow
The pump has a 0.5 HP motor. VEVOR gives a flow of up to 3,000 GPH (gallons per hour) and a maximum head of 30 ft. Flow tells you how much water moves per hour, and head tells you how high the pump can push it against resistance from pipes, fittings and the pool's inlet height. Real-world flow is lower than the maximum, since hoses, bends and a dirty filter all add resistance. As a rough guide, pool owners compare flow with the pool's volume to estimate how long a full turnover takes. VEVOR positions it for multiple above-ground pools.
24-hour timer
A built-in timer supports continuous and single-cycle modes, and lets you schedule filtration. Running a pool pump on a schedule means you don't need to remember to switch it on and off, and it can be arranged around your day.
Setup
The listing describes quick assembly: assemble the unit, connect the hoses, and start. It stresses a seamless one-piece design that minimizes leak risks during disassembly and assembly. Hose and connection details vary between pools, so check that the fittings match your pool's inlet and outlet.
Size
The unit measures 18.3 x 19.5 x 22.6 in. Place it on a firm, level surface close to the pool, with space around it for hoses and access to the controls, and protect the electrical connection as the manual and local codes require.
Who it suits
It suits owners of above-ground pools who want a pump and filter in one package with filter media already in place and an automatic schedule.
What to check before you buy
- Pool size: compare the flow with your pool's volume and hose size.
- Connections: confirm hose diameters and fittings for your pool.
- Electrical: use a suitable outdoor-rated, protected outlet, and follow the manual and local codes.
- Space: allow room around the 18.3 x 19.5 x 22.6 in footprint.
- Maintenance: read how to rinse, backwash or replace the media.
- Winter: follow the manual for draining and storing it.
The short version
- A one-piece 12-inch pool filter and 0.5 HP pump, model HCP370A-F, for above-ground pools.
- Up to 3,000 GPH and a 30 ft maximum head.
- Filter media pre-installed; VEVOR claims 6X faster filtration than silica sand pumps.
- Built-in 24-hour timer with continuous and single-cycle modes.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
