VEVOR D52-F 52cc Gas Post Hole Digger: specs, bits and who it suits

The VEVOR D52-F is a gas-powered post hole digger with a 52cc engine, sold with two auger bits and three extension rods. It is meant for digging holes for fence posts, deck and pergola posts, and for planting trees and shrubs. Here is what the listing's specs mean.

The 52cc engine

VEVOR lists a 52 cc engine, with a power output of 1450W and speeds up to 9350 rpm. A gearbox with ball-bearing shafts and alloy gears reduces that speed and turns it into the torque the auger needs. VEVOR says this adapts to sandy soil, wooded ground and farmland. As with most auger work, rocks, roots and heavy clay will slow progress or stall the bit.

It's a two-stroke design, so fuel and oil are mixed. The listing gives a 1:40 oil-to-gasoline ratio and includes an oil can for measuring. Always follow the manual for fuel, mixing and storage.

Bits and extension rods

The kit includes two bits, 6 inch and 10 inch. The 6 inch is common for fence posts and planting small shrubs, while the 10 inch suits bigger posts and larger plants. The alloy steel bit is 31.5 inches long, with a powder-coated surface to help reduce rust and wear. A 7.8 inch extension rod adds depth, and there are three in the box. Longer reach also means less bending over, but deeper holes put more load on the machine and the operator.

Starting and shutting down

The starter pull cord is 3.94 ft long, which VEVOR says is about one-half longer than a standard cord and gives more leverage for pull starts. A quick-shutoff switch on the handle stops the engine fast. The 0.32 gal fuel tank is meant to cut down on refuelling between holes.

Handle and cooling

A thickened, steel-welded handle strengthens the frame, and a foam grip is there for comfort. VEVOR says enlarged cooling vents extend continuous operating time. A machine of this type is typically operated with two hands and, because an auger can catch and twist, in a firm stance. Read the manual for how to handle a bind or kickback, and wear eye, hearing and foot protection.

Emissions

The listing says the digger is EPA listed. This refers to US emissions rules for small engines, and rules differ by region, so check what applies where you live.

Size and weight

It measures about 21.7 x 11.8 x 13.8 inches and weighs 34.5 lb, so it is a two-handed machine to carry and operate. Some users prefer a two-person model for the largest bits.

What's in the box

• The 52cc earth auger
• 3 extension rods
• 2 drill bits (6 in and 10 in)
• 1 spark plug
• 1 oil can
• 1 tool kit

Who it suits

It suits homeowners and small contractors who dig several holes for fences, decks, pergolas or planting, where hand digging would be slow.

What to check before you buy

• Hole size: match the bit diameter to your posts or plants.
• Depth: compare the bit and rods' combined length with the depth you need.
• Ground: rocky or root-filled ground may need other tools.
• Utilities: have buried lines located before any digging.
• Fuel and upkeep: you'll need two-stroke oil, and the spark plug and air filter need periodic care.
• Noise and local rules: gas tools are loud and can be restricted in some areas.

The short version

• A 52cc, 1450W gas post hole digger with up to 9350 rpm.
• 6 inch and 10 inch bits, three extension rods, spark plug, oil can and tool kit.
• 1:40 fuel mix; 0.32 gal tank; quick-shutoff switch.
• About 34.5 lb.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.