Home / Outdoor & Garden · Product overviews / Sports / Cycling · More from monTEK
monTEK VA1009OR Automatic Lift Bike Rack: features, specs and fit
A wall-mounted manual bike lift from monTEK that raises a bike to a vertical position, holds up to 71 lb and fits 24-29 inch wheels. What the specs mean.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The monTEK VA1009OR is a wall-mounted bike lift in orange. It raises a bicycle to a vertical position against the wall, which frees floor space in a garage, apartment or storage room. This page covers how it works, what the numbers mean and what to confirm about your bike.
How the lift works
monTEK calls it an automatic mechanical lift. You place the bike on the system, and it gradually raises the bike to a vertical position with minimal effort. The lift runs without electricity, which the brand says reduces reliance on power sources and keeps maintenance low. There's no motor to wire or plug in, but it also means the lift is only as capable as its mechanical limits.
Weight, wheel and tire limits
The listing gives a maximum load of 71 lb (about 32 kg) and says it supports bikes with 24 to 29 inch wheels. Tires may be up to 86 mm in height and 3 inches in width. monTEK describes the lift as suitable for road, mountain and e-bikes. E-bikes can easily exceed the weight limit because of the battery and motor, so check your bike's weight first. The 3 inch width limit rules out most fat-tire bikes.
Materials and size
The lift is made of anodized aluminium and stainless steel, and measures about 9.0 x 7.2 x 69.4 inches and weighs 19.8 lb. Anodized aluminium has a hardened surface that resists scratches and wear.
Saving floor space
A bike stored vertically takes a fraction of the floor area of one hung horizontally or leaning on a wall. monTEK says it suits tight areas such as garages, apartments and small storage rooms. Check the height available: the rack is nearly 70 inches tall, and the bike will stand upright above it.
Setting it up
monTEK says installation needs basic tools and uses the included hardware and step-by-step guide. A wall-mounted lift carries the full weight of a bicycle, so fix it into solid wall structure, such as studs or masonry, using fasteners suited to your wall, and follow the manual.
Who it suits
It suits owners of lighter bikes with 24-29 inch wheels who want tidy vertical storage and don't want to lift a bike overhead. It's less suited to heavy e-bikes or fat bikes beyond the listed limits.
What to check before you buy
- Bike weight: up to 71 lb.
- Wheel and tire size: 24-29 inches; tires up to 3 inches wide and 86 mm high.
- Wall: confirm studs or masonry, and the hardware for your wall type.
- Space: measure the height of the wall area and the clearance around the bike.
- Frame shape: check how your bike's frame, fenders or racks sit on the lift.
- Parts: the hardware and instructions are listed in the box.
The short version
- A wall-mounted manual lift that stores a bike vertically.
- Holds up to 71 lb; fits 24-29 inch wheels and tires up to 3 inches wide.
- Anodized aluminium and stainless steel; no electricity needed.
- Basic tools and included hardware for installation.
- Check bike weight and wall structure first.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
