VEVOR TYJJ-3A-60 60-Inch LED Liquor Bottle Display Shelf: features and specs

The VEVOR TYJJ-3A-60 is a three-tier display shelf for bottles, with LED lighting built into each tier. It turns a home bar, a restaurant or a club back-bar into a lit display, with colours and effects that can be changed from a remote or phone.

Size and capacity

The shelf is 59.4 in long, 12 in deep and 5.9 in high per the listing (about 151 x 30 x 15 cm), and weighs 20.9 lb. VEVOR says it holds around 54 bottles across the three tiers. Actual capacity depends on bottle diameter, so tall, wide or oddly shaped bottles will reduce that count.

Acrylic construction

The shelves are made from 0.2 in (5 mm) translucent acrylic. VEVOR says the polished surface is waterproof and easy to clean, and that the material lets the light spread in vibrant colours. Acrylic is lighter than glass and doesn't shatter in the same way, though it can scratch, so a soft cloth is the usual advice for cleaning.

The lighting

VEVOR specifies 60 lamp beads per metre and two light tubes per layer. More beads per metre typically means a smoother, more continuous glow with less visible dotting. Options include:

• 7 static colours
• 2 music modes
• Timing from 1 to 4 hours
• Adjustable brightness and speed

Remote and app control

Control comes from an RF remote or a smart app, with a stated range of 26 ft (about 8 m). RF remotes don't need line of sight, unlike infrared ones, so you can use them from another part of the room. VEVOR says several shelves can be controlled together with one remote, which suits a bar with more than one unit.

Power

The shelf can run from a 110-240 V power adapter, or from a laptop or power bank by USB. VEVOR presents this as making it usable both indoors and outdoors, for example at a pool party. If using a power bank, check that its output matches what the manual calls for, and follow local electrical codes and the manual.

Where it is used

The brand lists home bars as well as commercial bars, clubs, KTV rooms and pool parties.

What to check before you buy

• Confirm the surface you intend to use can carry the shelf with a full load of bottles, and see the manual for setup details.
• Measure your bottles against the 12 in depth and the tier spacing.
• Check which power adapter plug type comes in the box for your region.
• Decide whether you want app control, and check that your phone is supported.
• Look at the cable length and distance from a socket.
• Keep the LED strips away from spills and follow the manual's cleaning steps.

The short version

• A 3-tier, 60 in acrylic shelf with built-in LED lighting for about 54 bottles.
• 7 colours, 2 music modes, 1 to 4 hour timer, adjustable brightness and speed.
• RF remote and app control within 26 ft; several shelves can share one remote.
• Powered by a 110-240 V adapter or by USB from a laptop or power bank.
• Weighs 20.9 lb.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.