VEVOR LI5-01 36-Inch 5-Burner Built-In Induction Cooktop: specs and fit

The VEVOR LI5-01 is a 36-inch built-in induction cooktop with five cooking zones and touch controls. It is designed to be set into a countertop, and it suits kitchens where you want a full-size hob that heats pans directly and can run several at once. Because of its power output and voltage, it needs proper electrical planning before it goes anywhere near a counter.

How induction cooking works

An induction cooktop uses a coil under the glass to create a magnetic field that heats the cookware itself, rather than a flame or a hot element. In general, that gives quick heating, fine control and a surface that stays cooler than a gas or radiant electric one, though it still warms from the pan. It only works with magnetic cookware. VEVOR lists cast iron, enamel, cast aluminium and stainless steel as compatible; a fridge magnet that sticks to the base of a pan is a handy test.

Five zones and 9200W

VEVOR rates the cooktop at 9200W total output with five burners that can be used at the same time. That figure is the combined output across all zones. When you cook on several burners, the cooktop typically shares power among them, so a single zone will not draw the full 9200W. Each zone has its own control, and VEVOR describes the heat range as nine levels, covering stewing, frying, simmering, steaming, boiling and grilling.

Touch controls, timer and pause

The panel is touch-sensitive, and VEVOR says each cooking zone can be controlled independently. It has a timer from 1 to 99 minutes and a pause button for stepping away from the pans without losing your settings.

Safety functions

VEVOR lists five safety features:

• Automatic shut-off
• Spill-proof function
• Child safety lock
• Residual heat indication
• Over-temperature protection

The listing's title also mentions the child lock and over-temperature protection. These help, but they do not replace the usual care around hot cookware, and the manual remains the guide.

Size, weight and installation

The unit measures 35.4 x 20.5 x 2.4 inches (about 90 x 52 x 6 cm) and weighs 31.1 lb (about 14 kg). It is a built-in design with rounded edges and no sharp corners. VEVOR states that it is suitable for 220-240V, 50/60Hz. That is a high-power, higher-voltage connection, and appliances of this kind typically need a dedicated circuit and a hard-wired connection rather than a standard plug-in outlet. Have a qualified electrician check the supply, and follow local codes and the manual.

Who it suits

It suits a kitchen renovation or replacement where a 36-inch built-in surface is wanted, households that often cook with several pans at once, and anyone moving from gas or electric to induction who is ready to check their cookware.

What to check before you buy

• Electrical supply: confirm voltage, circuit capacity and the type of connection with an electrician.
• Cutout size: compare the counter cutout dimensions in the manual with your countertop and cabinets.
• Cookware: test your pans with a magnet; non-magnetic pans will not heat.
• Clearance: check the ventilation space needed beneath the unit.
• Surface care: check the manual on cleaning, and avoid dragging rough pans on the glass.
• Local rules: some places require licensed installation.

The short version

• A 36-inch built-in induction cooktop with five zones and a 9200W combined output.
• Nine heat levels, independent zone control, 1-99 minute timer and pause button.
• Five safety functions, including child lock and over-temperature protection.
• Designed for 220-240V, 50/60Hz, so plan the electrical connection with a qualified electrician.
• Works only with magnetic cookware.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.