VEVOR 10FT Portable Folding Wheelchair Ramp (HXZDPD120): specs and fit

The VEVOR HXZDPD120 is a 10-foot aluminum folding ramp for wheelchairs, scooters and walkers. It bridges a step, door threshold, garage entry or driveway curb, and it folds in half for carrying and storage. VEVOR also lists it for pets.

Length, height and slope

A ramp's length determines how steep it is for a given rise. This one is 119.7 inches long, and VEVOR says it suits rises of 10 to 20 inches. A common guideline in accessibility standards is a slope of about 1:12, which means one inch of rise for each foot of ramp. By that guideline, a 10-foot ramp would match a rise of about 10 inches. Steeper slopes make the ramp harder to climb and harder to control on the way down. Measure your own rise and check the guidance that applies to the user and the equipment.

Size, weight and folding

Unfolded, the ramp measures 119.68 x 29 x 3.3 inches. Folded, it is 60.3 x 14.57 x 6.5 inches. The listing gives weights of 56.9 lb (25.8 kg) and 59.7 lb, so expect around 57 to 60 lb, which is a heavy single lift. An anti-scratch handle allows carrying with one hand, and VEVOR says it stores against a wall or in a vehicle trunk. A pair of gloves is included.

Load limit

VEVOR rates the ramp for up to 800 lb (362.9 kg). The weight of the person, the chair or scooter and any extra load all count together. VEVOR notes that slight sinking and quick rebound is normal during use. Check the manual for how the limit applies.

Surface and edges

The aluminum surface is grooved and carries a full-coverage non-slip coating, which VEVOR calls double anti-slip protection. Raised side baffles run along the edges, and reflective strips make it more visible at night or in dim light. Integrated transition plates are meant to meet the ground and the step smoothly. Even so, wet or icy conditions may reduce grip on any ramp.

Construction

The ramp is made from aluminum alloy, which VEVOR describes as lightweight, corrosion-resistant and weather-resistant. A thickened base and an upgraded middle connection are meant to reduce the gap where it unfolds, and stainless steel hinges resist rust. Aluminum is a common choice for portable ramps because it is strong for its weight and does not rust.

Placement

VEVOR says the ramp needs flush placement on level ground, and that you should leave room at the door. Plan for enough clear space at the top and bottom for the chair to turn and for the door to open.

Who it suits

It suits homes with a step or low porch, caregivers, and people who need a ramp they can move between places or take in a vehicle. Anyone with a permanent entrance should consider a fixed ramp.

What to check before you buy

• Rise: measure from the ground to the top of the step or threshold.
• Slope: check that the length gives a gradient suitable for the user and equipment.
• Landing space: check there is level space at both ends.
• Weight capacity: add up the user, the chair or scooter and any load.
• Handling: confirm you can carry a ramp of about 57 to 60 lb.
• Guidance: follow the manual and local accessibility requirements.

The short version

• A 10-foot folding aluminum ramp, model HXZDPD120.
• Made for rises of 10 to 20 inches; rated by VEVOR to 800 lb (362.9 kg).
• Grooved, coated non-slip surface, side baffles and reflective strips.
• Folds to 60.3 x 14.57 x 6.5 inches, with a carrying handle.
• Needs level ground and clear space at the door.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.