VEVOR TJBP5002SB-HEX 5000 lb Swivel Trailer Jack: specs and fit

The VEVOR TJBP5002SB-HEX is a hand-cranked, bolt-on swivel jack for the tongue of a trailer. It raises and lowers the coupler so you can hitch, unhitch and level the trailer without lifting it by hand. VEVOR rates it at 5,000 lbs dynamic load capacity and describes it for RV, horse, utility and boat trailers.

Dynamic load, explained

"Dynamic" load usually means the weight the jack can lift while it is being cranked. The weight it can hold while stationary can be different, and in many products it is higher. VEVOR gives 5,000 lbs as the working figure, so read the manual for any separate static figure. In practice, what matters is your trailer's tongue weight, which is only part of the total weight. Keep a comfortable margin below the limit.

Lift range

The listed lifting range is 11.5 to 25.7 inches, from fully retracted to fully extended. A taller range helps with higher couplers, such as on larger trailers or when the tow vehicle sits high. A low retracted height helps towing clearance. Measure your coupler with the trailer level, and make sure it falls inside that range.

Swivel, handle and cranking

The jack swivels so it can be turned up out of the way for towing, and it comes with a handle for cranking. No power is needed, which means no wiring and one less thing to fail. The trade-off is effort: a loaded tongue takes more turns, though manual jacks of this class are generally designed with gearing to keep that manageable.

Build and finish

VEVOR says it is made of carbon steel with a rust-resistant galvanized finish. Galvanizing puts a zinc coating on the steel, which typically helps in damp, salty or muddy conditions. Dirt on the screw is a common cause of stiff cranking, so occasional cleaning and lubrication is sensible.

Bolting it on

The jack bolts to the trailer tongue, and VEVOR says the parts and assembly instructions are included. The model name carries "HEX", which hints at a hex-style crank connection, but check the listing and manual for exact details. Mounting needs a sound, flat surface on the tongue, correct fasteners and proper tightening. Size is listed as 7.3 x 7.1 x 22.0 inches, and weight is 19.8 lb.

Who it suits

It suits owners of mid-size trailers who need more lifting capacity than a 2,000 lb jack gives, such as larger utility trailers, horse trailers and travel trailers within the limit. It is hand operated, so owners who want push-button lifting should look at powered jacks instead. A jack is not a stand: use wheel chocks and follow your trailer's manual, and never work under a trailer supported only by a jack.

What to check before you buy

• Tongue weight: confirm it sits well inside the 5,000 lb limit.
• Coupler height: it should fall between 11.5 and 25.7 inches.
• Mounting surface: check the tongue's width, thickness and clearance for the bracket.
• Swivel clearance: make sure the jack can rotate up without hitting the coupler, wiring or a propane bracket.
• Upkeep: keep the screw clean and lightly lubricated.
• Static capacity: check the manual for any figure for holding weight as well as lifting.

The short version

• A bolt-on swivel trailer jack with a 5,000 lb dynamic load capacity from VEVOR.
• A lift range of 11.5 to 25.7 inches, cranked by hand with a handle.
• Carbon steel with a galvanized, rust-resistant finish.
• Weighs 19.8 lb; parts and assembly instructions are included.
• Suits RV, horse, utility and boat trailers within its limit and height range.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.