VEVOR RV Tankless Water Heater: 42,000 BTU, 15-inch door and who it suits

The VEVOR RV tankless water heater is a gas-fired unit that heats water on demand for a camper, trailer or motorhome. It replaces a conventional tank, delivering hot water for showers and washing up, and has a front outlet for outdoor use. VEVOR gives it a 42,000 BTU output and a 15 x 15 inch door that is designed to suit many RV openings.

How a tankless heater works

A tank heater keeps a volume of water hot. A tankless unit heats water only when a tap opens. Water flows through the heat exchanger, the burner fires, and the outgoing water is warmed to the temperature you set. The practical result is that you don't wait for a tank to refill and reheat, although the water supply and gas supply must both be adequate. VEVOR says the 42,000 BTU output delivers hot water quickly for showering, dishwashing and other uses. BTU is a measure of heat output; a higher figure generally means more heating capacity.

Seasonal temperature control

VEVOR calls its approach segmented combustion technology. The company says it adjusts the water temperature to seasonal changes, helping keep water comfortably warm year-round and avoiding excessively hot water in summer, which it says is also more energy-efficient. In general, segmented burners can fire only part of the burner when less heat is needed.

Controls and display

An LED smart display with touch controls lets you adjust temperature and power, and a remote controller is included. This is convenient if the unit is installed in a compartment where reaching it is awkward. The listing doesn't give the remote's range or how it connects.

Outdoor outlet

Besides the internal outlet to the RV plumbing, the unit has a front outlet for outdoor use. VEVOR suggests washing pets and vehicles. It is a useful feature for campers who want warm water outside the van without extra equipment.

Fit and connections

The listing gives these dimensions for installation:

• Door: 15 x 15 inches, white.
• Rear chamber: 12.6 x 12.6 x 14 inches.
• Water and gas connections: 1/2" NPT.
• Exhaust pipe: 2.36" diameter.

The package dimensions are 15 x 15 x 15 inches, and the unit weighs 26.9 lb (about 12 kg). VEVOR says it suits most RVs and describes quick connections. Even so, a replacement needs to match the existing cut-out, venting and fittings, so measure your opening before you decide.

Certification and safety

VEVOR lists the unit as CSA certified with multiple protection features. Gas appliances in vehicles need careful installation, correct venting and leak checks. Follow the manual and local codes, and consider having a qualified technician install it.

Who it suits

It suits RV owners replacing a worn or failed water heater whose compartment has similar dimensions, or owners who want a heater that gives hot water on demand. It is also relevant for those who want an outdoor washing outlet. It is less suitable if your RV has a very different cut-out or runs on a different fuel.

What to check before you buy

• Opening size: compare your cut-out with the 15 x 15 inch door and 12.6 x 12.6 x 14 inch chamber.
• Fuel and connections: confirm the gas type and 1/2" NPT fittings match your system.
• Venting: check the exhaust diameter and routing.
• Power: ask what electrical supply the unit needs, as the listing doesn't say.
• Installation: follow the manual and local codes.
• Winter care: read the manual on draining the unit in freezing weather.

The short version

• A 42,000 BTU gas tankless water heater for RVs.
• 15 x 15 inch white door, touch controls, LED display and a remote.
• Front outlet for outdoor washing.
• CSA certified, with 1/2" NPT water and gas connections.
• Measure your opening and follow the manual and local codes.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.