VEVOR 33x20x13 ft Inflatable Spray Paint Booth: features, specs and fit

The VEVOR Inflatable Paint Booth is a large portable enclosure for spraying paint or coatings on cars, motorcycles and parts. Instead of a fixed steel booth, it is an air-filled tent with two blowers and a filter system, so it can be set up in a garage, driveway or other open space and packed away afterwards.

Size inside and out

VEVOR gives the outside size as 32.8 x 19.68 x 13.12 ft (10 x 6 x 4 m). The internal working space is 28.38 x 15.75 x 12.79 ft (8.65 x 4.8 x 3.9 m), and a separate isolation chamber measures 4.43 x 15.75 x 12.79 ft (1.35 x 4.8 x 3.9 m). An isolation chamber works as an airlock: you enter through one door, close it, then go through the second door, so dust from outside stays out of the work area. VEVOR says the interior has 30% more space than conventional models.

Two blowers, two jobs

The booth has two blowers, rated at 950W and 1100W. One inflates the structure, and the other circulates the air inside. VEVOR notes that the blower must keep running to maintain inflation, and that venting through the stitching is normal. So the booth needs a reliable power supply for as long as it is in use.

Filtration

VEVOR describes an efficient filter system with isolation doors on both sides, aimed at keeping the working environment clean. Filters in spray booths typically catch airborne dust or overspray, but they need replacing as they load up. Paint fumes are a separate matter: spraying always calls for suitable ventilation, protective equipment and the paint maker's safety instructions.

Materials and anchoring

The walls combine 201D oxford fabric with PU coating and 4 mm PVC. VEVOR says this resists dirt and is durable. Stakes and ropes are included for fixing the tent to the ground, and VEVOR mentions an upgraded zipper and double stitching for stability. It lists use in a garage, driveway, lawn or indoors.

What it can hold

VEVOR says it can accommodate motorcycles or car parts for painting and repair, and also names ceramic coating and window colouring. It can serve as a temporary space for exhibitions or camping too. Overall dimensions are about 393.7 x 236.2 x 157.5 inches, and the packed weight is listed as 145 lb (about 66 kg).

Who it suits

It suits hobbyists and small workshops that need a temporary, clean-ish spraying area without building a permanent booth. Local rules on spraying, fire safety and fume extraction vary, so check them first.

What to check before you buy

• Space: the booth is about 10 x 6 m outside, so measure the setup area and the height.
• Power: the two blowers total 2,050W; confirm your circuits can handle them.
• Surface: the ground needs to be suitable for staking and clear of sharp objects.
• Ventilation and fire safety: follow local regulations and the paint maker's guidance.
• Filters: ask what replacement filters you will need.
• Weight: at 145 lb, plan for two people to move the pack.

The short version

• A large inflatable spray booth, 10 x 6 x 4 m outside.
• Two blowers (950W and 1100W): one to inflate, one to circulate air.
• Filter system and an isolation chamber with doors on both sides.
• Oxford fabric and PVC construction with stakes and ropes included.
• The blower must run continuously to keep it inflated.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.