VEVOR Hitch Mount Cargo Carrier with Folding Ramp: specs and fit

The VEVOR hitch mount cargo carrier (model XSJ23-F08) is a steel-framed platform with a folding ramp that attaches to a vehicle's trailer hitch. VEVOR lists it for carrying a mobility scooter, and also luggage or gear. It moves a heavy load onto the back of a car without lifting. Here is what the specs mean and what to confirm.

How the carrier works

The carrier slides into a 2-inch hitch receiver and holds a platform behind the vehicle. A ramp lets a scooter drive or be pushed up onto it. The loading area measures 45.3 x 25.6 inches inside, and VEVOR lists a load capacity of up to 500 pounds. That figure is for the carrier. Your vehicle's hitch, and its tongue weight limit, may be lower, so check both.

Hitch compatibility

VEVOR says it fits vehicles with Class III or IV 2 x 2 inch hitch receivers, including cars, SUVs, vans and pickup trucks. A Class III or IV receiver is a common size, but the vehicle's own limit for the weight it can carry on the hitch varies by model. The owner's manual and hitch label give the limit, and the carrier, load and any scooter all count toward it.

Securing the load

Two heavy-duty ratchet straps hold the scooter and luggage in place, according to VEVOR. A U-shaped bolt stabilizer is meant to remove wobble and friction as the road changes. Hitch carriers tend to shake in the receiver, so a stabilizer can reduce rattling. Check the straps and fittings each time you load.

Folding for storage and travel

The ramp folds and the basket stands upright, so there is no need to take it apart after use. VEVOR's reminder is to lock the ramp with the pin before folding. The folded carrier is easier to put away than a fixed platform.

Materials

The carrier is made of iron with a powder coating, which VEVOR says gives water and rust resistance and protection in extreme weather. Powder coating is a baked-on finish that typically resists chips and corrosion better than ordinary paint, though scratches should still be touched up to limit rust.

Dimensions and weight

The listing gives the package as 47.2 x 26.8 x 4.4 inches and the weight as 61.3 lb (about 27.8 kg). Allow for that weight when fitting it to the hitch, and consider whether you can manage it alone.

Ramp angle

The listing refers to an image showing the relationship between height and angle. Ramp angle depends on how high the platform sits above the ground, so check the picture against your vehicle and your scooter's ground clearance.

Who it suits

It suits people who need to carry a mobility scooter, or heavy luggage and gear, behind a vehicle that has a 2-inch hitch receiver, without lifting.

What to check before you buy

• Receiver size: confirm a 2 x 2 inch receiver, Class III or IV.
• Weight limits: check your vehicle's tongue weight limit, and your scooter's weight.
• Scooter size: compare your scooter with the 45.3 x 25.6 inch area and the ramp.
• Visibility: check that lights, number plate and rear view meet local rules when loaded, and fit extras if needed.
• Parking: allow for the length it adds to the vehicle.
• Upkeep: inspect the straps, pins and bolts regularly and follow the manual.

The short version

• A 2-inch hitch-mounted carrier with a folding ramp, model XSJ23-F08.
• 45.3 x 25.6 inch loading area and a listed 500 lb capacity.
• Two ratchet straps and a U-shaped bolt stabilizer.
• Powder-coated iron; foldable; 61.3 lb.
• Fits Class III or IV 2 x 2 inch hitch receivers as listed.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.