Auxbeam Gypsophila X 9-Inch LED Headlights for Jeep JL and Gladiator JT

The Auxbeam Gypsophila X is a pair of 9-inch round LED headlights made for the Jeep Wrangler JL and Gladiator JT. They replace the stock headlights with LED units that have a distinctive X-shaped light signature. Here is what the listed specs mean and what to confirm before ordering.

Fitment first

Auxbeam lists these fits:

• Jeep Wrangler JL and JLU (Sport, Rubicon, Sahara), 2018 to 2023
• Jeep Gladiator JT, 2019 to 2023
• Right-hand-drive Jeeps
• Wrangler 4xe, only on JL models whose stock headlights are halogen

The brand states clearly that the headlights are not for the JK. Because Jeep changed headlight styles and wiring between generations, check your model year and which headlights you currently have.

Light output

Auxbeam rates the headlights at 6,500 lumens on high beam and 3,000 lumens on low beam. Lumens measure the total light emitted, so the number alone says little about how far light reaches. The beam pattern matters as much. The listing describes a sharp cut-off line on the low beam, meant to give good visibility without dazzling other drivers. A cut-off is the boundary where light drops off sharply, and it keeps the light on the road, not in other people's eyes. Aim matters too, so check the beam after fitting.

The X design

The "Gypsophila X" name refers to an X-shaped cross line, surrounded by 12 small dots. Auxbeam says this stands out from other 9-inch JL headlights, and that the 3D lens gives a brighter, wider lit area. The X design is mainly about looks, while the lens shapes the beam.

Build and weather resistance

The housing is die-cast aluminium with a polycarbonate lens. A ribbed back is designed to carry heat away, and the unit is lightweight, according to the brand. It has IP67 protection, which generally means dust-tight and able to handle temporary immersion. Three breather valves on the back are meant to stop fog (condensation) forming inside.

Installation

Auxbeam calls the headlights plug and play. They come with a wiring harness and a fuse. The fuse is optional, since the listing says the lights work normally without installing it, and it is supplied only to make fitting easier. No bracket is needed, and a built-in adjustable angle screw lets you set the beam angle. Follow the manual, and disconnect the battery before working on the wiring.

Who it suits

These suit JL and JT owners who want LED headlights in the factory round format, with a distinctive appearance. They are not meant for older Jeeps, and Wrangler 4xe owners should check the halogen condition in the listing.

What to check before you buy

• Model and year: confirm that your Jeep matches the list above.
• Stock headlight type: the listing notes that 4xe fitment applies to halogen headlights only.
• Aim: plan to adjust the beam height afterwards, using the screw and the manual.
• Local rules: check that aftermarket headlights are allowed for road use where you live.
• Pair: confirm the listing covers a left and right set.

The short version

• A pair of 9-inch round LED headlights for Jeep Wrangler JL/JLU (2018-2023) and Gladiator JT (2019-2023).
• Rated by Auxbeam at 6,500 lumens high beam and 3,000 lumens low beam.
• X-shaped light signature with a 3D lens, die-cast aluminium housing and IP67 sealing.
• Plug and play with a harness and fuse; no bracket needed.
• Not for the Wrangler JK; check your year and stock headlights first.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.