VEVOR SMS-038 Electric Wire Stripping Machine: features, specs and uses

The VEVOR SMS-038 is a bench-top electric wire stripping machine. It feeds scrap cable through a set of blades that slit the insulation, so the copper inside can be pulled out and sorted. It is aimed at anyone who handles more scrap wire than is practical to strip with a hand tool.

What the machine does

VEVOR describes it as an automatic stripper for scrap wire, designed for recycling copper by removing plastic and rubber insulation. A 370W motor drives the feed rollers through a gearbox. The brand rates the stripping speed at 98 ft/min (30 m/min), which is a feed rate for the cable rather than a count of finished pieces.

In general, machines of this type work by pulling cable past a fixed blade set to a given depth. The blade cuts the sheath lengthwise, and the conductor is then separated from the cut jacket by hand.

Channels, blades and cable range

The machine has 11 channels and 10 blades, which VEVOR says lets it handle different wire types and sizes. The stated stripping diameter runs from 1.5 mm to 38 mm (0.06 to 1.5 inches). The blade thickness is listed as 2.8 mm (0.11 inches).

Channels matter because each one suits a band of diameters. Thin household cable and thick armoured or power cable need different openings, and a cable that is a loose fit in its channel tends to slip, while one that is too tight can jam. Matching the cable to the closest channel is the main skill in using any machine like this.

Motor, gearbox and cooling

The 370W motor runs on 110V at 60Hz, a standard North American supply. VEVOR says it has high-performance cooling so it can keep working for long stretches, and that a heavy-duty gearbox gives a longer service life. For a machine that may run for hours on scrap, heat management and gearbox durability are what tend to decide how long it lasts.

Build and protective features

The body combines an aluminum alloy frame, a steel base and transparent acrylic plates. The acrylic lets the operator see the cable moving through, and the aluminum keeps the weight down for a machine of this class. The listing gives the weight as about 25 kg (55 lb) and the size as 17.3 x 12 x 14.1 inches (about 44 x 30 x 36 cm).

VEVOR adds a protective housing and an emergency stop button. As with any machine that has moving rollers and blades, follow the manual, keep hands and loose clothing clear of the feed, and wear the supplied gloves.

Who it suits

It suits small scrap yards, electricians and contractors who collect offcuts, and hobbyists who recycle cable in volume. It is less useful for occasional stripping of a few short wires, where a hand stripper is simpler.

What to check before you buy

• Cable sizes: compare the diameters you handle with the 0.06-1.5 inch range and the available channels.
• Cable type: ask whether your cable is flexible, stiff, armoured or shielded, since these behave differently in a stripper.
• Power: it needs a 110V, 60Hz supply, so check the voltage if you are outside North America.
• Space and weight: at about 25 kg it needs a sturdy bench and room for feed-in and collection.
• Upkeep: the box includes one extra blade, so check how blades are changed and sharpened or replaced.
• What's in the box: the machine, an extra blade, a pair of gloves, an Allen wrench and an oil seal plug.

The short version

• A 370W motorized wire stripping machine for scrap cable from 1.5 to 38 mm (0.06 to 1.5 inches).
• Rated by VEVOR at 98 ft/min with 11 channels and 10 blades.
• Aluminum alloy and acrylic body on a steel base, with a protective shell and an emergency stop.
• Runs on 110V, 60Hz, and weighs about 25 kg (55 lb).
• Comes with an extra blade, gloves, an Allen wrench and an oil seal plug.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.