VEVOR 29-Piece 3/4-Inch Drive Impact Socket Set: contents, specs, uses

This VEVOR set holds 29 shallow impact sockets with a 3/4-inch square drive, supplied in a storage case. It is aimed at heavy-duty work such as removing and fitting wheel lug nuts on trucks, RVs and other large vehicles, where smaller-drive tools often run out of capacity.

What 3/4-inch drive means

The drive size is the square opening that connects the socket to the wrench or impact gun. Sets with 3/4-inch drive are used for larger fasteners and higher torque than the common 1/2-inch drive. Heavy truck, trailer and agricultural work typically calls for them. The listing gives the packed set as 24.6 x 4.0 x 13.6 in and 49 lb, so it is a substantial kit.

Impact sockets versus ordinary sockets

Impact sockets are made to be driven by a power impact wrench as well as by hand. They typically have thicker walls and are made from tougher alloy steel than chrome sockets, since an impact gun delivers repeated hammering force. VEVOR describes this set as made from alloy steel (chrome vanadium, listed as CR-MO) and says it resists abrasion and wear and won't easily crack under high pressure. Only use impact-rated sockets with impact tools, and follow the guidance from the impact wrench maker.

Six-point design

Each socket has a 6-point, high-torque design. VEVOR says it grips the stronger flat sides of the nut or bolt head instead of the corners. In general, 6-point sockets are less likely than 12-point ones to round off a stubborn or worn fastener.

The sizes included

All 29 are shallow sockets: 3/4, 13/16, 7/8, 15/16 and 1 inch, then 1-1/16 through 2-1/2 inch in 1/16-inch steps (1-1/16, 1-1/8, 1-3/16, 1-1/4, 1-5/16, 1-3/8, 1-7/16, 1-1/2, 1-9/16, 1-5/8, 1-11/16, 1-3/4, 1-13/16, 1-7/8, 1-15/16, 2, 2-1/16, 2-1/8, 2-3/16, 2-1/4, 2-5/16, 2-3/8 and 2-7/16). The sizes are all in inches, with no metric sockets listed.

Case and storage

The set comes in a sturdy storage case that keeps the sockets organised and portable. The brand pitches it at mechanics.

Who it suits

The listing names wheel lug nuts as the headline job, especially on trucks, RVs and other heavy-duty vehicles. It would also fit anyone working with large imperial-size bolts who already owns, or plans to buy, a 3/4-inch drive wrench or impact gun.

What to check before you buy

• Measure or look up your fastener sizes. The set is in inches only.
• Confirm that your tool has a 3/4-inch square drive. Smaller drives need an adapter, and adapters have torque limits.
• Check that shallow sockets reach your nuts; studs that stick out may need deep sockets, which are not in this set.
• Make sure your wrench or gun is rated for the torque you need.
• Plan for the weight and space: the packed case is 49 lb.
• Take lug nut torque specs from the vehicle manual, and use a torque wrench for final tightening.

The short version

• 29 shallow 3/4-inch drive impact sockets, from 3/4 to 2-1/2 inch.
• Alloy steel construction with a 6-point, high-torque design.
• Works with impact wrenches or by hand.
• Supplied in a storage case; the packed set weighs 49 lb.
• Aimed at lug nuts on trucks, RVs and other heavy vehicles.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.