Home / Tools & DIY · Product overviews / Welding & Soldering / MIG Welding Equipment · More from ARCCAPTAIN
ARCCAPTAIN MIG130 FIT 130A 3-in-1 Welder: features, specs and who it suits
A portable 110V inverter welder offering gasless flux-core MIG, lift TIG and stick welding, with synergic control, up to 0.12 inches of thickness and 7.72 lb weight.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The ARCCAPTAIN MIG130 FIT is a compact 130A inverter welder that runs from a 110V supply. It handles three processes in one body: gasless flux-core MIG, lift TIG and stick (MMA). ARCCAPTAIN positions it for DIY projects, outdoor repairs, farm equipment and road machinery. It comes with 1 lb of welding wire.
Three processes in one machine
Flux-core MIG feeds a hollow wire that carries its own shielding, so no gas cylinder is needed. This makes it suited to outdoor work where wind would blow away shielding gas. Stick (MMA) welding uses coated electrodes and is common for thicker or dirtier metal. Lift TIG starts the arc by touching and lifting the tungsten electrode. The TIG torch must be bought separately.
Synergic control
In MIG mode the machine uses "SYN" mode. After selecting the welding mode and the wire diameter, the voltage and current are automatically matched, and you can fine-tune them. ARCCAPTAIN describes it as a two-step start. Synergic control generally lessens the settings beginners must work out themselves, though technique still matters.
Inverter and thickness
The welder uses an IGBT inverter with a digital MCU, which ARCCAPTAIN says improves stability and performance. Inverters are typically lighter than older transformer welders. The brand states it can handle thicknesses up to 0.12 inches (about 3 mm). That is in the range of sheet, light brackets and many repair jobs, but not heavy plate.
Size and weight
The unit weighs 7.72 lb (about 3.5 kg) and measures 11.4 x 6 x 6.18 inches (roughly 29 x 15 x 16 cm). It can be carried by a handle or shoulder strap.
Protection features
ARCCAPTAIN lists VRD (voltage reduction device), and over-current, over-voltage, overload and overheating protection. It says the machines passed laboratory tests. As with any welding equipment, follow the manual, work in a ventilated area, wear a proper helmet, gloves and protective clothing, and keep flammable materials away.
Who it suits
It suits hobbyists, home mechanics and farm or workshop users who do light repairs and fabrication. The ability to weld without gas helps people who work outside. Anyone planning heavy structural work, or long, continuous welding, should compare duty cycles and output.
What to check before you buy
- Power supply: confirm your outlet and circuit can supply the current the manual requires.
- Materials: check which metals and wire types the machine supports.
- TIG use: you need to buy the TIG torch separately.
- Consumables: check the wire diameters, tips and electrodes it uses.
- Duty cycle: read the manual for how long you can weld before a rest.
- Protective gear: you need a helmet, gloves and suitable clothing.
The short version
- A 130A, 110V inverter welder with flux-core MIG, lift TIG and stick modes.
- Synergic control matches voltage and current to the wire diameter.
- Handles up to 0.12 inches (about 3 mm); weighs 7.72 lb (3.5 kg).
- TIG torch sold separately; includes 1 lb of wire.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
