Home / Tech · Product overviews / More Tech · More from VEVOR
VEVOR TLMPL-1.5M Motorized Projector Lift: features, specs and fit
A hidden ceiling projector lift with 4.9 ft of travel, a 33 lb load limit, dual-scissor design and remote and wired control. What the specs mean.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The VEVOR TLMPL-1.5M is a motorized lift that hides a projector inside the ceiling and lowers it when needed. When the projector isn't in use, it retracts out of sight, so the room looks tidy and nothing hangs in the way. It is intended for home cinemas, offices, classrooms and studios.
How the lift works
The lift uses a dual-scissor structure combined with a conveyor belt. VEVOR says this gives smooth movement, stability and precise positioning. Scissor mechanisms fold flat when retracted, which is why they suit tight ceiling voids better than a single telescoping pole. Cable management is built in, and the brand says it keeps the look clean and leaves room to work.
Travel and control
The extension travel is 4.9 ft (1.5 m). Height can be adjusted by wireless remote or wired control. In general, the travel figure is the distance between the retracted and fully lowered position, so measure the ceiling height and the drop you want for your screen or wall. A longer drop can leave the projector at a good height in a tall room.
Load capacity and materials
The lift is made of cold-rolled steel, which VEVOR says offers wear and corrosion resistance. The maximum projector weight is 33 lb (about 15 kg). That is the combined figure to compare with your projector, and also with any mount or cabling you add to the tray. A large bottom tray is designed to fit many projector types, though you should still check hole spacing and the projector's footprint.
Hidden installation
The idea is to place the lift in a ceiling cavity so that it doesn't disturb the framework or take up visible space. It needs a suitable void, structural support and a means of power and signal cabling. The listing describes the product as 12.4 x 12.0 x 8.5 inches in its packaging, with a weight of 36.9 lb (about 16.7 kg). Mounting a unit of that weight overhead should follow the manual and local building practice, and a professional installer is often a sensible choice.
Where it fits
VEVOR names presentations, teaching, meetings, movie nights, stage and studio use, and both residential and commercial spaces. The lift can be paired with a retractable screen, so the whole setup disappears when not in use.
Who it suits
It suits owners who want a tidy home cinema, meeting rooms where the projector should stay out of sight, and installers who need a concealed solution.
What to check before you buy
- Projector weight: keep it comfortably below the 33 lb limit.
- Ceiling void: measure the depth, width and length of the cavity against the lift's dimensions when retracted.
- Structure: check that the ceiling can carry the load, and use the fixings the manual describes.
- Cabling: plan power, HDMI or other video cable routes and slack for the 4.9 ft drop.
- Throw distance: make sure the lowered projector position matches your screen size and projector's throw ratio.
- Servicing: consider how you can reach the unit if it needs adjustment later.
The short version
- A motorized, concealable ceiling lift with 4.9 ft (1.5 m) of travel.
- Dual-scissor structure with built-in cable management.
- Rated for projectors up to 33 lb, with a large bottom tray.
- Remote and wired control.
- Cold-rolled steel construction.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.
