Seagate Exos X24 24TB Enterprise Hard Drive: specs and who it suits

The Seagate Exos X24 (model ST24000NM002H) is a 24TB internal hard drive built for data centres and other large storage systems. It belongs to Seagate's Exos X range, which the company designs for scalable cloud environments where capacity per rack, power use and consistent behaviour all matter.

What 24TB means in practice

Capacity is the headline. A single 24TB drive holds what several smaller drives would, so a server or storage array can reach a given total with fewer bays. Seagate describes the drive as supporting data analytics and dense architectures for the highest rack-space efficiency. Fewer drives for the same capacity typically means fewer connections to manage and less power drawn overall.

SATA and 7200RPM

The drive uses a 6Gb/s SATA interface and spins at 7,200 revolutions per minute. SATA is widely supported by servers, NAS enclosures and desktop motherboards. A mechanical drive at this speed is typically used for bulk storage, such as archives, backups, media and analytics data. It is not a replacement for a solid-state drive when you need the quickest random access.

Consistent performance

Seagate says the Exos X24 gives consistent performance, with low latency and repeatable response times through enhanced caching. In enterprise storage, predictable response times are often as important as peak speed, because arrays are limited by their slowest member.

Reliability figures

Seagate lists a 2.5 million-hour MTBF (mean time between failures) and a 5-year limited warranty. MTBF is a statistical figure across a large population of drives. It is not a promise for any single drive, and it is best read as a way to compare drive families. Warranty terms vary, so read the actual conditions.

Built for scale

Seagate says the Exos X series is designed for highly scalable environments that need low power consumption and weight, and for the total cost of ownership targets of most cloud data centres. The drive is a 3.5-inch model, about 5.9 x 5.9 x 7.9 inches in the listing's packaged dimensions, and weighs 1.5 lb (about 0.7 kg).

Who it suits

It suits system builders, IT teams and technically confident home users filling a server, a NAS or a rack with high-capacity storage. Drives of this class are made for always-on systems with good airflow.

What to check before you buy

• Bay and connector: confirm your enclosure takes a 3.5-inch SATA drive and that the controller supports a 24TB drive.
• Firmware and compatibility: check that your NAS or RAID controller lists support for drives this large.
• Cooling and noise: enterprise drives can be louder and warmer than desktop models, so check airflow and placement.
• Backups: a bigger drive holds more to lose, so plan redundancy and a separate backup.
• Warranty: read the 5-year limited warranty terms and any registration steps.

The short version

• A 24TB, 3.5-inch internal enterprise hard drive, model ST24000NM002H.
• 6Gb/s SATA, 7,200RPM, with enhanced caching for steady response times.
• Rated by Seagate at 2.5 million hours MTBF with a 5-year limited warranty.
• Aimed at data centres, dense racks and large storage builds.
• Check bay, controller and cooling support before installing.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.