Home / Tech · Product overviews / Home Audio / Sound Bars · More from PHILIPS
Philips B7207 2.1 Soundbar with Wireless Subwoofer: features and specs
The Philips B7207 is a 2.1-channel soundbar with an 8-inch wireless subwoofer, Dolby Digital Plus, HDMI ARC and Bluetooth. What the specs mean and who it suits.
This page contains an affiliate link, marked as such. If you buy through it, Bloiq may earn a commission at no extra cost to you.
The Philips B7207 (model TAB7207/37) is a 2.1-channel soundbar paired with a wireless subwoofer. It is built to lift the thin, flat sound of most TV speakers, adding clearer dialogue and a lot more bass, with a single bar that sits under the screen. Here is what its specs mean in practice.
What "2.1 channels" means
The "2" is the left and right channels in the bar; the ".1" is the subwoofer, which handles low-frequency effects. The bar is about 31.5 inches (80 cm) wide, so it suits TVs of roughly 40 inches and up. Philips lists an 8-inch wireless subwoofer and a total of 520 W max output. Peak figures like this are a maximum rather than a continuous level, so treat them as a guide to headroom, not loudness.
Angled tweeters and a wider soundstage
Philips says the angled tweeters at each end of the bar send sound out sideways, widening the soundstage and separating instruments more clearly than a plain front-firing bar would. In a typical living room, that can make a small bar feel wider than its cabinet.
Dolby Digital Plus and virtual surround
Dolby Digital Plus is an audio format used by many streaming services. The B7207 uses it to virtualize additional channels, which means it simulates surround sound from just the bar and subwoofer rather than using rear speakers. Virtual surround varies with the room, and it is generally less precise than real rear speakers, but it adds a sense of space to films and shows. A Stadium EQ mode is also included, which Philips describes as bringing live-sports atmosphere while keeping commentary clear.
Connections and setup
The bar offers several ways in:
- HDMI ARC, which sends TV audio to the bar over one cable and lets the TV remote control volume;
- Optical and Audio in for older TVs or other sources;
- Bluetooth for streaming from a phone or tablet;
- USB for playing music files from a drive.
Philips says the bar is Roku TV Ready, so it works with a Roku TV's settings and remote. Easylink (HDMI-CEC) lets one remote control compatible connected devices. The subwoofer connects wirelessly to the bar, though it still needs a mains outlet.
What's in the box
Philips lists the soundbar, wireless subwoofer, remote control with battery, power cord, wall mount bracket, quick start guide and a worldwide warranty leaflet.
Who it suits
It suits people with a mid-sized TV who want fuller sound and stronger bass for films, sport and music without running speaker wire around the room. It is less of a match for those wanting true surround with rear speakers or object-based formats such as Dolby Atmos, which this model does not list.
What to check before you buy
- TV connections: confirm your TV has HDMI ARC, optical or an analogue output.
- Space: measure the shelf or stand for the 31.5-inch bar, and find a spot for the subwoofer near an outlet.
- Wall mounting: a bracket is included, but check your wall type and the manual's instructions.
- Bass in your home: a powerful subwoofer can carry through walls and floors, so consider neighbours and the volume controls.
- Remote compatibility: if you rely on HDMI-CEC control, check it is enabled on your TV.
The short version
- A 2.1-channel soundbar with an 8-inch wireless subwoofer and 520 W max output.
- Angled tweeters for a wider soundstage; Dolby Digital Plus virtual surround and a Stadium EQ mode.
- HDMI ARC, optical, audio in, Bluetooth and USB.
- Roku TV Ready and Easylink (HDMI-CEC) for single-remote control.
- Wall mount bracket and remote included.
Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.


