ASUS ProArt B760-Creator D4 motherboard: features, specs and who it suits

The ASUS ProArt B760-Creator D4 is an ATX motherboard for Intel's LGA 1700 socket that uses DDR4 memory. ASUS designed it for content creation work such as 3D rendering, virtual production and 4K or 8K video editing. The "D4" in the name matters: it is the version for DDR4, which suits anyone reusing existing memory.

Processors and memory

ASUS says the board unlocks the performance of 13th and 12th Generation Intel Core processors. The B760 chipset sits in the mainstream range, so it focuses on the connections and power design creators need rather than every overclocking option. The DDR4 support means older modules can carry over from a previous build, though DDR5 modules will not fit.

Power design and cooling

The board uses a 12+1 teamed power solution with each stage rated for 50A. ASUS explains that teamed stages combine the high-side and low-side MOSFETs and drivers into a single package. It adds alloy chokes and durable capacitors, along with Digi+ voltage-regulator control. In general, a robust power section helps a processor keep steady voltage during long renders and exports.

PCIe 5.0 for graphics

The graphics slot supports PCIe 5.0, which ASUS says offers twice the data transfer speed of PCIe 4.0. Today's graphics cards seldom use all that bandwidth, but the newer standard gives room to grow. It remains backward compatible, so older cards work too.

Storage

Three M.2 slots are on board. According to ASUS, two are PCIe 4.0-ready for speeds up to 64 Gbps, and the third runs over PCIe 3.0 at up to 32 Gbps. A sensible approach is to put the operating system and active projects on the faster pair and use the third for archives or scratch files. A separate E-key M.2 slot takes a 2230-size WiFi and Bluetooth module, which is sold separately.

Connectivity

• Ethernet: 2.5 Gb and 1 Gb ports. ASUS suggests using them together, for example one for the internet and one for a local network-attached storage device.
• Thunderbolt 4 header: the board has an on-board header rather than finished ports. With a compatible ASUS ThunderboltEX 4 add-in card (sold separately), ASUS says you can reach bi-directional speeds up to 40 Gbps over one cable, with daisy-chaining and displays up to 8K.
• USB: a front-panel USB 3.2 Gen 2x2 Type-C connector for up to 20 Gbps, plus USB 3.2 Gen 2 Type-C.
• ProArt Creator Hub: ASUS's software for monitoring and adjusting the system.

What to check before you buy

• Confirm your processor is supported and whether a BIOS update is required first.
• Make sure you are using DDR4 memory, not DDR5.
• Check that your case takes ATX and your power supply has the right connectors.
• If you want Thunderbolt 4 ports, remember the add-in card and any WiFi module are extra.
• Think about how many drives you plan to fit, and which slots run at which speed.
• Confirm your CPU cooler fits the LGA 1700 socket.

The short version

• ATX board for Intel LGA 1700 with DDR4 memory.
• PCIe 5.0 graphics slot and three M.2 slots.
• 2.5 Gb and 1 Gb Ethernet, plus a Thunderbolt 4 header for an optional card.
• 12+1 power stages rated for 50A each.
• Suits creator builds that reuse DDR4 memory.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.