VEVOR Manual Pole Saw, 7.3-27 ft: features, specs and who it suits

The VEVOR Manual Pole Saw is a hand-powered tree pruner on an extendable pole. It lets you cut branches that are out of reach from the ground, without a ladder and without a motor, battery or fuel. The pole telescopes in sections from 7.3 to 27 feet (2.24 to 8.24 m), and the saw head can also be used on its own for lower work.

How the extendable pole works

VEVOR describes the pole as eight sections that lock together to give a working length between 7.3 and 27 feet. Shorter settings give more control for low branches and shrubs. Longer ones reach high limbs, though in general a longer pole is harder to steer, because the weight at the far end acts on a longer lever.

Each joint has what VEVOR calls a double-lock design, meant to make locking easy and firm so the sections don't slip or rattle. The brand gives the weight as 11 lb (5.1 kg), about 10% lighter than before, and lists the shipping weight at 14.8 lb. The poles are fibreglass, which is a common choice for pruners because it is light and does not conduct electricity as readily as metal.

The blade and its two hooks

The saw blade is carbon steel, 0.05 inch (1.2 mm) thick, with a Teflon-style coating that VEVOR says resists rust and helps it last. A coating like this typically reduces friction in the cut, but a manual saw still needs clean, sharp teeth, so wipe off sap after use.

Two hooked knives are built into the head. The one on top is intended for removing twigs when you pull back. The one underneath is intended to free a branch that has become stuck during cutting. A pole saw is usually used with a pulling stroke, since pulling keeps the pole in line and puts less strain on the joints.

Insulated handle and secure connections

VEVOR says the handle and pole connections are made of insulating material, and that reinforced screws keep the saw head firmly attached to the pole so it doesn't loosen in use. The listing's wording about insulation is the brand's own. Whatever the materials, keep well clear of power lines when working overhead, and follow the manual.

Storage and what's included

A sleeve covers the blade when the tool isn't in use, and a storage bag holds the accessories. Because the pole is long even when retracted, check where you will keep it.

Who it suits

It suits homeowners with mature trees, palms or tall shrubs who prune now and then and want a tool with no engine. Manual pole saws are best on small to medium branches. For thick limbs, a powered saw or a professional is more usual.

What to check before you buy

• Branch size and height: confirm the longest reach you need and the thickest branch you plan to cut.
• Weight at full extension: a pole around 27 feet long can feel heavy at the tip, so think about how long you will use it.
• Overhead hazards: look for power lines and falling-branch zones, and wear eye protection and a hard hat.
• Storage space: allow room for the pole, sleeve and bag.
• Upkeep: check how to clean, dry and replace the blade, as the manual describes.

The short version

• A manual telescoping pole saw reaching 7.3 to 27 feet.
• Double-lock joints and lightweight fibreglass poles, about 11 lb (5.1 kg) by VEVOR's figure.
• Coated carbon steel blade, 1.2 mm thick, with hooked knives above and below.
• Insulated handle and pole connections, a blade sleeve and a storage bag.
• Can double as a hand saw for lower branches and small logs.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.