VEVOR 4/8 Frame Electric Honey Extractor: features, specs and uses

The VEVOR 4/8 Frame Electric Honey Extractor is a stainless steel centrifuge for beekeepers. It spins uncapped honeycomb frames so the honey flings out of the cells and runs to the bottom of the drum, leaving the comb intact for reuse. A 140W motor replaces hand cranking.

How an extractor works

After the wax cappings are cut away, frames are loaded into a drum. As the drum spins, centrifugal force pushes honey out of the comb against the drum wall, where it drains down to a tap. Because the comb isn't crushed, bees can refill it, which saves them work in the next season.

Capacity and frame sizes

The extractor takes up to 8 small or medium frames, or up to 4 large frames. VEVOR gives the frame sizes it is suited to as deep, 18.9 x 9 inches (48 x 23 cm), and medium, 18.9 x 6.3 inches (48 x 16 cm). Check your own frames against those numbers, since frame sizes vary between hive systems.

Motor and speed

The motor is rated at 140W, with adjustable speed up to 1,300 rpm. Variable speed is useful in practice: honey extraction typically starts slowly to avoid blowing out heavy comb, then speeds up as the frames lighten. VEVOR says the motor saves your arms and back from the hand-cranking that manual extractors need.

Clear lid and safety stop

The lid is transparent, so you can see the honey moving without opening the drum. VEVOR also says the machine stops automatically if the lid is opened during extraction. Even with this feature, follow the manual and let the drum come to a full stop before reaching in.

Stand and height

The legs are adjustable from a minimum of 39.3 inches (100 cm) to a maximum of 42.5 inches (108 cm), which lets you set a comfortable working height and a tap that clears your container. The legs can be bolted to a piece of plywood for extra stability, which keeps the barrel steady and protects the floor.

Material and cleaning

The extractor is polished stainless steel, which VEVOR describes as rust-resistant and easy to clean. Honey is sticky, so rinsing the drum with warm water soon after use is typically easier than letting it set. Dry it fully before storing.

Who it suits

It suits hobby and small-scale beekeepers with several hives who want something larger than a hand-cranked unit. The listing mentions use in a kitchen or basement.

What to check before you buy

• Frame size: measure your frames against the deep and medium sizes above.
• Space: the unit stands about 33 inches tall in its basic form, up to 42.5 inches with legs extended, and it has a 19-inch footprint.
• Power: confirm the mains supply and use a safe, dry location.
• Stability: decide whether to bolt the legs to plywood.
• Honey handling: plan a filter, bucket and a place to keep the honey.
• Cleaning space: you need a sink or hose nearby, and a dry place to keep it.

The short version

• An electric stainless steel honey extractor with a 140W motor and speeds up to 1,300 rpm.
• Holds 8 small or medium frames, or 4 large frames.
• Transparent lid, with automatic stop when the lid is opened.
• Height-adjustable legs from 39.3 to 42.5 inches.
• Rust-resistant polished stainless steel that is easy to rinse clean.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.