AINAVI 10.25-Inch Touch Screen for Audi Q5 (2009-2017) with CarPlay

The AINAVI 10.25-inch touch screen is a replacement multimedia unit made specifically for the Audi Q5 built from 2009 to 2017. It swaps the factory display for a larger one and adds wireless Apple CarPlay and wired Android Auto, while keeping the car's original radio system working underneath. This is a vehicle-specific part, so fit matters more than anything else.

Which Q5 it fits

AINAVI states that the unit is designed only for the 2009-2017 Audi Q5 with the original "Audi multimedia" radio system, the CD and amplifier setup. The brand warns that cars with the Audi Concert or Audi Symphony system do not fit this version and need a different model. Before ordering, identify which system your car has, using the manual or the car's menus, and ask a dealer or installer if in doubt.

The screen

The display is 10.25 inches with 1920 x 720 resolution and a QLED panel, according to AINAVI. The wide, short shape is typical of modern in-dash screens. The brand says it runs a Linux-based system and supports an AHD 720p backup camera. AHD is a higher-definition analogue camera standard that typically gives a sharper image than the older CVBS standard, but it requires a camera that supports it.

CarPlay and Android Auto

CarPlay is wireless on this unit, and Android Auto is wired. Both mirror a phone's navigation, calls, messages and music onto the screen. AINAVI lists Bluetooth specification v2.1 + EDR and v4.1 Low Energy, with audio streaming, automatic phone book transfer and hands-free calling. The brand adds one practical instruction: when using CarPlay, make sure no device is connected to the car's original Bluetooth.

Original functions retained

The unit works alongside the factory system rather than replacing it. AINAVI says it keeps the original radio features, including the iDrive knob control, Bluetooth, radio, the factory rear camera, parking radar and steering wheel controls. In general, that's the benefit of an integrated upgrade compared with a universal head unit, which may lose some of these functions.

Support and installation

The weight is listed as 4.8 lb (about 2.2 kg). AINAVI says its technical support team will help with installation. Fitting a screen like this usually means removing dash trim and connecting it to the car's wiring or connectors, so many owners have it done by a car audio installer.

Who it suits

It suits Q5 owners with an older factory display who want a larger touchscreen and smartphone integration without replacing the whole radio system. It's aimed at people who want to keep their steering wheel and iDrive controls.

What to check before you buy

• Your radio system: confirm the car has the "Audi multimedia" CD amplifier system, not Concert or Symphony.
• Model year: the unit is listed for 2009 to 2017 only.
• Camera: check your rear camera type, and whether you want an AHD camera.
• Installation: decide whether to fit it yourself or use an installer, and ask about the car's warranty.
• Phone: check your phone supports CarPlay or Android Auto, and unpair the car's original Bluetooth.

The short version

• A 10.25-inch, 1920 x 720 QLED touchscreen for the 2009-2017 Audi Q5 with the Audi multimedia system.
• Wireless CarPlay and wired Android Auto.
• Keeps the iDrive knob, steering wheel controls, factory camera and radar.
• Supports an AHD 720p backup camera.
• Not for Concert or Symphony systems.

Bloiq is reader-supported. Some links may earn us a commission; it never affects what we write. How we make money.